[1 5FT 1500mm]
Bypass Barn Door Slide Hardware Kit Sliding Door Hanging Track System J Roller Double Door Rail
Note: Only hardware kit is for sale, door panel is not included. This hardware kit is for BYPASSDOUBLEDOOR
[Product Information]
Material: Carbon steel
Roller Diameter: 23/4"
Roller Weight: Approx. 3.9 lbs (1.7 kg).
Total Weight: 13.3 - 33.1 lbs (6
Sliding Rail Thickness: 3/13" (6mm)
Sliding Rail Width: 14/7" (40mm)
Door weight capacity: up to 100kg (220lbs)
Fit door panel thickness: 13/8"-13/4" (35mm-45mm)
Surface: Matte Black
Single Track Bypass Hardware Kit Package Included
1 x Rail
2 x Straight Steel Hangers with Bolts
2 x Offset Steel Hangers with Bolts
2 x Allen Wrench Door Stopper
6 x 1-3/8" Spacers with Lag Bolts
2 x Floor guides (with screws)
2 x Anti-jumper with screws
2 x Anti-offset jumper with screws
1 x Barn Door Hardware Installation Manual
Installation Dimensions
Wall track drill holes = door height + 1-11/16"
The first hole of the door hanger is 1-9/16" from the top of the door and the second hole is 3-9/16" from the first hole.
Q: How much ceiling area do I need?
A: Install at least 6 inches from the top of the door to the ceiling.
Q: Can I cut the truck?
A: Yes, you can cut it to your desired length.
Q: Can I use it outdoors?
A: For outdoor use, it is recommended that you regularly add paint and oil to extend the service life of the cover on the truck.
Q: What situation do I need to add headboard?
A: 1.Have doorway trim. 2. If the studs do not match the pre-drilled holes on the rail
Q: How thick door to use? How long is the load capacity?
A: 1.Door thickness should be 1-3/8" ~ 1-9/16" better. If the door thickness is 1-1-3/4", you will need to reverse the bolt on the inside door because it is offset. Hanger size is fixed; 2. Truck limit is 230 lbs.