Feature(may vary by option.)
●Round mirror that gives off a retro feel of old car style
●Reproduces the difference in the shape of the nut on the mirror side and the car side. Nut design with homage to the original Z1 mirror
●Inner weight construction with zinc weights inside the mirror. Reduces vibration and increases visibility
●Adopts an extra thick rod with a diameter of 0.5 inch (12The mirror has been improved to ensure that the mirror is not easily shaken even on bikes with a lot of vibration
●Uses a R1000 mirror, ensuring a wide rear view (genuine mirror has a curvature R1200-1300)
[05. Chrome & High 02. Positive screws]
[02. black & high 02. Positive screws]
[03. black & short 02. Positive screws]
[06. chrome & short 02. Positive screws]
[01.black & low 01. Positive screws & meets new safety standards]
[04. chrome & low 01. Positive screws & meets new safety standards]
[04. chrome & low 02. Positive screws]
[01.black & low 02. Positive screws]
[05. Chrome & High 01. Positive screws & meets new safety standards]
[02. black & high 01. Positive screws & meets new safety standards]
Description
Round mirror that emits a retro look with an old car style.
The combination of shake-resistant and wide angle mirrors ensures visibility as well.
By placing zinc "weight" inside the mirror, it reduces vibration and reduces mirror shaking.
Adopts an extra thick rod with a diameter of 0.5 inch (12 mm) and a high attachment strength of the mirror, making it suitable for motorcycles with frequent vibrations.
A regular genuine mirror has a R1200 to 1300 curvature ratio and R1000 mirror, ensuring a wide rear view.
Conforms to new safety standards (vehicles after 2007 require additional bumper installation)
Type: Short / Chrome Plated
Size: M10 positive screws.
Laser markings on the mirror surface.
Left and Right Common One Side
This product is a wide mirror type. Perspectives are different from the original. Be sure to drive carefully until you get used to it.
To ensure proper rear view, please attach the mirror to the left and right position and adjust it to the appropriate position.
When installing this product, please tighten the tightening torque of the M10 bolt at the specified value per vehicle.
The tightening torque of the mirror nut on the mirror housing is 15 N.m.