Feature

●[Product Parameters] Operating voltage: DC 12V - 48V; Operating frequency: 315mhz; Maximum load current: 10A (output current: less than 8A)
●Easy to use: Wireless control and easy to install, simply connect the transmitter and receiver to test before shipping, and install it without any worries. Wireless receiver controller with high confidential, stable performance, easy to change operating models
●【Widely Used】#Wireless remote control switch can control lights, motors, fans, electric doors, locks, windows, blinds, cars or other appliances widely used in home and industrial
●【2CH More Control】2 channel wireless remote switch, adjustable working method, control equipment, momentary, toggle, latch, 5 seconds delay
●Signal: Wireless RF signal can pass through walls, floors, doors, windows, etc. You can use two or more units in the same location. The receiver with transmitter can be turned on and off from anywhere within a reliable distance (up to 50-150m, no obstacles)


Description

About Receiver:
Model Number:AK-RK02E
Operating voltage: DC 12V-48V
Static state: less than 6mA
Operating Temperature: -40 + 80 degrees
Receiver sensitivity: -105dBm or higher
Operating frequency: 315mhz
Output Voltage: DC and AC are optional
Output Current: less than 8A
Maximum load current: 10A

How to work: Learn button changes the way you work
1. Momentary: Press the learn button once.
Relay: Long Press->On;Release->Off
2. Toggle: Press the learn button 3 times.
Relay:-> Press On. Press the same button again-> OFF
3. Latch: Press the learn button twice.
Relay:-> Press On. Press Other Button-> Off.
Delay 5 seconds: press the learn button 4 times
Press the remote A button, the relay A will activate and keep working for 5 seconds. Same as Relay B.

Learning and Clear Method:
1. Learning: Press the learning button once, the LED indicator flashes, and press the transmitter button A. Press the LED indicator flicker 3 times to turn off and learn button A normally. Press the learning button twice, the LED indicator flashes, and press the transmitter button B. Press the LED indicator flicker 3 times to turn off and learn button B normally.
2. Clear: Press and hold the learning button for about 8 seconds, turn the indicator on and off, then press the remote. The relay didnt respond to. This means that the code is clear successfully.

About Transmitter:
Transmitter Model: AK1000-2F
Operating voltage: DC 12 V (Battery: 12 V, 23 A)
Operating frequency: 315MHz
Remote Distance: 164.4 - 668.4 ft (50 -
Working current: 13 mAh
Encode: EV1527 code

Package
1 x Transmitter
1 x Receiver