Feature

●Temperature control range: -50℃~110℃ Input Power: DC 12V Refresh Rate: 0.5 S
●In a stylish down state, press + and -, then turn on the product, and the product will be restored to the factory settings
●Please refer to the product description at the bottom of the page for specific product details and parameter information. See product description for more information on how to use the product
●Please be aware of precision products. Please note that you must have expertise in order to use this product. We cannot accept returns if the product is damaged due to operating mistakes. Please understand. All products are factory tested. Tool DIY products Please understand
●If you have any quality problems with the product. Please contact us first. Please feel free to contact us. How do I contact you? Please click "RASBEE" (under the "Buy Now" button there is "Sold by RASBEE") Click Ask question on the new page to contact us by email


Description

Rasbee W1209 DC12V Thermostat Thermostat Temperature Heat Sensor Switch -50~110℃ XH-W1209 Waterproof Sensor Probe with Temperature Controller Digital Display DIY

1. 100% fully processed SMT, wave soldering, stable performance, good consistency.
2. Intelligent than embedded central processor chip (MCU), lower power consumption
3. Set the automatic power-off memory (MCUs built-in EEPROM memory cell)
4. Control the accuracy of 0.1 degrees Celsius
5. Hysteresis 0.1. You can control decimal (from 0.1 to 15.0).

Temperature control range: -50~110℃
Resolution: 0.1°C from -9.9 to 99.9°F (0.1°C).
Temperature measurement accuracy: 0.1°C (0.1°C).
Accuracy Control: 0.1°C
Rebound accuracy: 0.1 °C (0.1 °C)
Refresh Rate: 0.5 S
Input Voltage: DC 12V
High temperature protection: 0 to 110 degrees Celsius
Output range: 110A relay
Measurement input: NTC (10K 0.5%) waterproof sensor
Output: One relay output, Capacity = 20A 125VAC, 20A 14VDC
Environment requirements: -14 to 140°F (-10 to 60°C) humidity 20%-85%
Power consumption: Static current: ≤35MA Pulling current: ≤65MA

In addition to the operating settings, the mode P0 can be turned on, turned off, and P1: Hysteresis values changed, P2, 3: H, and L maximum display, P4: Display correction, P5: Timer, etc.
For applications: Turn the fan to cool when the temperature rises high; Turn the heater on when the temperature rises; Turn on the heater when the temperature is lower; Do not use the buzzer if the temperature is too high (low).



Package Includes:
3pcs W1209 DC12V Thermostat Thermostat