Daskins proprietary high-performance filtration filter uses "powder-activated carbon" to remove unpleasant odors and dirt from fried oil. The filtered oil can be used repeatedly, so you can expect to save money.
|
|
|
---|---|---|
1. Set the filterSet the filter (1) into the inner pot. Hold the filter ear firmly in the upright position and slowly push it in without any gap. |
2. Filter oil after cookingAllow fried oil to cool for about 10 minutes or more.(392°F (180°C) or lower, suitable temperature approx. 122°F (50°C). Remove the lid and gently pour oil into the inner pot. Lard, palm oil, etc. cannot be filtered. |
3. Reuse filtered oilThe filtered oil can be stored away from high temperatures and humidity, and can be used for fried oil, as well as for preparing fried foods and vegetables (oil threading). |
Product Name: | Oil Filter |
Heat resistant | Below 396°F (180°C) |
Filtration Capacity | Approx. 3.9 oz (1,500 g) (approx. 3.5 fl oz (1,650 ml). |
Material: | Pulp, Rayon, Powdered Activated Carbon |
Application | Household tempura oil filtration |
Dimensions | Outer diameter: 3.5 inches (90 mm) |
Weight | 10g or more per piece |
Store away from direct sunlight, high temperatures, high humidity, and water.
Please do not open the filter until just before use.The oil may become cloudy due to moisture absorption.
The filter should never be washed with water.
There may be black or brown discoloration on the surface, bottom, and sides of the filter filter, but the activated carbon adheres to the surface and bottom of the filter, and it is deformed by heat during processing, so it does not affect hygiene.
Does not filter lard oil, palm oil, etc.
When using a new filtration filter, the filter absorbs oil and reduces the amount of oil after filtering is approximately 2.5 oz (70 g).
Replacement filter can be dispensed as general combustible waste.However, after filtration, please allow more than 1 day before disposal.
If the oil filter is not used for a long time (over a month), replace it with a new filter filter.
Even if you filtrate healthy oils, the color may not fade easily.
Do not use for anything other than its intended purpose.
Keep out of reach of children.
If the oil becomes dark or the smell after filtration, please replace it as soon as possible.
If you feel slower filtration progress, please try it because you may move the lid slightly during filtration, or remove the lid and use air flow to improve the filtration progress.
Oil temperature: 394°F (180°C) or lower (suitable temperature approx. 122°F (50°C).
When using an old type of oil based (capacity of 3.8 fl oz (1,000 mL), please cool the oil to about 122°F (50°C) and filtrate.
When setting the filter into an inner pot or pot, please hold the filter ear vertically and slowly push the filter into a gap.
Please replace the filter as soon as possible as possible as possible as possible as possible with approximately 3.1 oz (1,500 g) of oil filtration.
When replacing the filter filter, simply press the inner pot or pot upside down and lightly press the bottom of the filter with a chopstick, etc.
When the filtration time is extremely long (more than a day), it is clogged, so please replace it with a new filter filter.
If the oil becomes dark or the smell after filtration, please replace it as soon as possible.