Feature(may vary by option.)
●Replaceable pin vice resin drill set. (Can be used for drilling holes in resin (transparent resin), making foundations, plastic models, and making beading, etc. )
●Stores 2 Chucks in the Main Unit: 2 double head chucks are stored in the main unit, so you can change the zipper according to the tip you use
●Includes 10 HSS Steel Drill Blades: 0.8mm, 1mm, 1.2mm, 1.5mm, 1.8mm, 2mm, 2.2mm, 2.5mm, 2.8mm, 3mm (Do not use on hard objects such as metal or stone. Please be aware that the length of the drill may differ slightly depending on the lot, and drills with different diameters may look the same in length. )
●How to use: Apply the head to the palm of your hand and turn it vertically The head rotates for stable use
[1 Pin Vise + 20 Drills]
[1 Pin Vise + 10 Drills]
[2 Pin Vice + 10 Drills]
Description
How to install the drill:
Insert the drill into the center of the cross slit and screw it in the direction that takes up the cap.
If the cross slit is too open to make the center more difficult to match. Please note:
The cap part and middle part are threaded so you can remove the unit and
Each has a direct zipper
Be careful not to cut your fingers when unplugging or unplugging the drill.
How to Use:
Place the head on the palm of your hand and apply force vertically.
The head rotates for stable use.
Applying pressure vertically will cause work to be put or injured. Please note:
Fragments may fly. For protection, we recommend using glasses etc.
Instruction manual is not included.