Feature

●22 mm Square 印材 22 x 22 x 70 mm
●Mark the Tripitaka Katana (sword) 6 mm 印材 (the Tripitaka stone), 2 water resistant paper bag (# 80, # 800), torepe, carbon paper, 印材 (Eco), instructions, alphabet sampler with
●First Time All 篆刻 for a basic set. Engraved with easy to use, so even beginners with carved marking Sword on the senses. The Tripitaka stones are stronger, softer, the carved byproduct for easy connection.
●30 mm/35 mm set is also available.

Description

Necessary Tools


Tenkoku Chisel	Water-resistant paper for stone	mud	Tenkoku Vice

How to use the stamp knife


Hold pencil Carry pencil The edge of the blade is dangerous, so be careful not to lose the cap.	Push the blade into the stamp surface Place the blade on the stamp and add the thumb of the opposite hand.	Press with thumb Slowly press the back of the blade with the attached thumb to inscribe the stoneYou can use a sword with less slippage of the blade.	Do not put the stamp knife too lying down. If you put the stamp knife too lying down, the blade edge will dig into and you will not be able to achieve a smooth lucky knife.

Starry recipe


1. Polish the stamp surface Use water resistant paper to polish markings and eliminate seams.	② Draw and transfer the design. After drawing the design on the tracing paper, flip it over and place the carbon paper between the markings and rub it onto the paper.	3. Carve with an stamp knife. Carve with an stamp knife.When you finish carving, remove the stone powder cleanly and press it on a test.If there is any excess part, fix it with a stamp knife.	Done! Use them for letters, artwork, and more!

How to apply


Write on with pencil, transfer is now easy!	1. Apply the stamp surface with POSCA Apply POSKA orange on the stamp and let it dry well.	2. Transfer the drawing on the tempe Draw a design on the tempe, flip it over the dry markings and rub it on.	3. Draw with pencils. If it does not show well, you can easily fix it with a pencil.