◆小さいものを圧縮するときに使用。
◆先端直径5mm、高さ20mm。
Universal MCT-1150 | High Performance MCT-2150 | High Performance Model Low Test Force MCT-2150W | |
---|---|---|---|
Price | ¥331,432¥331,432 | ¥458,322¥458,322 | ¥686,111¥686,111 |
Maximum testing capacity | 500N | 500N | 500N |
Crosshead Stroke | 400mm | 370mm | 370mm |
Effective stroke (when using standard parallel tightening joins) | 315mm | 285mm | 285mm |
MEASUREMENTS | Width 9.8 x Depth 15.9 x Height 28.0 inches (250 x 40 | Width 9.8 x Depth 15.9 x Height 28.0 inches (250 x 40 | Width 9.8 x Depth 15.9 x Height 28.0 inches (250 x 40 |
Software Included | MCT-Logger (real-time graphing.Calculates and displays maximum points, displacement amount, etc. It also outputs curved data in CSV format.) | MSAT-Lite (displays arithmetic, processing results.Data analysis and graphing. It also outputs curved data in CSV format.) | MSAT-Lite (displays arithmetic, processing results.Data analysis and graphing. It also outputs curved data in CSV format.) |
Test power display resolution (when using 500N load cell). | 0.1N | 0.01N (0.1N display when over 100N) | 0.01N (0.1N display when over 100N) |
Test power display resolution (when using 50N load cell). | 1. | 1. | 0.001N (0.01N display when over 10N) |
JM-JFM-500N | J-C3-1KN-U | JM-B-500N | JM-B1-500N | JM-X001-500N | JM-X002-500N | |
---|---|---|---|---|---|---|
Price | ¥15,866¥15,866 | — | ¥12,854¥12,854 | ¥54,890¥54,890 | ¥19,570¥19,570 | ¥8,767¥8,767 |
MCT Series Specific Options | Parallel tightening type jaws | Compression receiving plate for 1KN/500N/50N φ2.4 in (60 mm) | R2 Bending Test Jig | R5 Bending Test Jig | Attachment Set | Hook |
Notes | 1 Piece Model2 pieces up and down are required to perform a tensile test | 1 Piece Model2 pieces up and down are required for compression testing | Bottom span between 0.4 - 4.3 inches (10 - 110 | Bottom span between 0.4 - 4.3 inches (10 - 110 | Hook (model: JM-X002-500N), V-groove pressure depressor (model: JM-X003-500N), pressure plate φ0.6 inches (15 mm) (model: JM-X004-500N), cone pressure (model: JM-X005-500N), chevron pressure (model: JM-X006-5-5-500006-5N). 00N), extension Set of 6 Jigs on the Rod (Model Number: JM-X007-500N) | Can hang string objects less than 0.2 inch (6 mm) in diameter. |
JM-X003-500N | JM-X004-500N | JM-X005-500N | JM-X006-500N | JM-X008-500N | JM-X010 | |
---|---|---|---|---|---|---|
Price | ¥3,156¥3,156 | ¥3,300¥3,300 | ¥2,965¥2,965 | ¥3,156¥3,156 | ¥3,300¥3,300 | ¥7,900¥7,900 |
MCT Series Specific Options | V-groove pressure | Pressing plate φ0.6 inch (15 mm) | Conical Pressure | Chevron Pressure | Pressing plate φ0.2 inches (5 mm) | Lower Adapter |
Notes | Tip V-groove angle 90 degreeDiameter 10mm, Length 20mm | Tip diameter 15mm, height 16mm | 90 degree angle, 10mm diameter, 20mm length | 60 degree angleBlade width 10mm, diameter 10mm, length 20mm | Tip diameter 5mm, height 20mm |
JM-X013 | JM-CL-100N | JM-X014-100N | JM-CL-100N-01 | JM-JXM-250N | JM-PZ-50N | |
---|---|---|---|---|---|---|
Price | ¥2,701¥2,701 | ¥66,991¥66,991 | ¥34,932¥34,932 | ¥25,809¥25,809 | ¥59,831¥59,831 | ¥128,348¥128,348 |
MCT Series Specific Options | MCT Jaw Stand for Tensilon Jigs | MCT Puncture Test Jig | Pin Chuck for 100N | Replacement Needles for Puncture Jig (10 pieces / 1 set) | Point Chuck for 250N | Container Seal Release Test Jig |
Notes | Includes 1 needle (φ0.04 inch (1 mm), tip R 0.02 inch (0.5 mm). | Grip pin diameter max. φ0.1 inch (3.2 mm). | Tip Width: 0.1 inch (2 |
Used to compress small items.Tip diameter 5mm, height 20mm