Feature(may vary by option.)

●Can be used for beveling and deburring stainless steel, thin plate, aluminum, wood, vinyl, resin, etc. It can also be used for reaming thin plates, chamfering countersunk screws, and deburring housings in vacuum pipes
●Chamfer Angle: 90° Material: Cobalt High Speed Steel (HSS-CO/M35) Hexagonal Shaft: 6.35mm Surface treatment: AlTiN Titanium Aluminum Night Ride Coating Specifications: 2-5mm
●Sharp edges, precise and clean chamfering, good cutting powder flakes TiAlN coating forms A1203 on the surface to create a hard protective layer when drilling, increases resistance to high temperatures and abrasive chipping, making it ideal for high-speed drilling
●HSS-Co M35 Steel Chamfer Cutter is coated with titanium nitride aluminum on the surface and HRC89. Much sharper than regular beveled drills. It also reduces the heat generated during friction

[15-20mm]




[5-10mm]




[10-15mm]




[2-5mm]





Description

Chamfer ToolChamfer Tool

Because it is sharp, please use it vertically.

Regular ironwork drills temporarily heat resistant with titanium coating, but the blade will not wear out and cut before the blade is hot and the result is a higher coefficient of wear and burn.Stainless steel is harder and more sticky than ordinary iron, so when used for work, we recommend Cobalt Hiss (HSS-CO) that is harder and more resistant to wear and tear.

ChamferChamfer

Product Name: Chamfer for Hexagonal Drill

Material: Cobalt High Speed Steel (HSS-Co/M35)

Surface Treatment: AlTiN Titanium Nitride Aluminum Coating

Hardness: HRC89Shaft Diameter: 1/4" hex shank (0.25 inches) (6.35 mm)

Chamfering angle: 90°

Chamfering Range: 0.2 - 0.4 inches (5 - 10 mm)

Uses: For cutting holes in stainless steel, iron, non-ferrous metals, etc.Can also be used on wood and acrylic plates.

Chamfer ToolChamfer Tool

ChamferChamfer

ChamferChamfer

Chamfer Cutter

The bevel cutter is a durable and practical conical drilling tool that can be used to remove burrs when drilling or removing dishes without the head of wood screws (screws).

Made of cobalt high speed steel, the hardness will not be affected even at high temperatures, and will not wear out even after long periods of use, and will not deform or shatter even under strong pressure.

It also has the advantage of keeping your lower back from shattering even when turned into a sharp edge.

Adopts a hexagonal shaft that can be used in situations where torque is applied.

Scope of Application

Suitable for home and general construction and engineering, especially for DIY use.Suitable for wood and soft metal, countersunk screws and fixtures

IDEAL Beveled Cutter:

Can be used for beveling, deburring wood, drilling holes in thin boards, deburring vacuum pipe chassis cases, etc.Versatile and versatile drill set for DIY home building engineering and more

Note:

Please read the instructions for the electric tools you use before using.

Before use, please check if there are any abnormalities such as cracks or cracks.

When putting on and removing the product, please do not connect electricity.

Please use protective glasses when working.Please attach protective equipment according to your work content and location.

The drill rotates at high speeds.Never touch your face or hands.

Be sure to avoid impact when using an impact driver.

Please do not modify or processing.Please do not use if it stops working.

After use, please clean it well and keep it away from children.

Please do not use for anything other than the intended purpose.