Feature(may vary by option.)
●Clean your unerasable whiteboard! Play, revive, and repair your whiteboard
●When the whiteboard does not fade, it is difficult to fade, you can coat the surface of the whiteboard to restore its ease of erasing. Makes dry erase boards clean and easy to erase
●The effect will last for a long time. The coating is clear. Simply attach it to the included hair and apply it as is. Also includes all necessary accessories to apply Comes in a plastic box for convenient storage
●Easy to operate. It takes 10 minutes to complete any woman or man. Drying time is over 8 hours. However, large whiteboard scratches cannot be repaired
●(Contents) Product Name: ins Value Whiteboard Coating Agent 1.3 fl oz (38 ml) (Approx. 12 - 15 sheets (width 180 cm x height 90 cm) whiteboard application volume 2.5 - 3.0 ml)) Accessories: 4 cleaning cloth, 1 sponge and 1 instruction manual (English language not guaranteed)
[58ml]
[38ml]
[118ml]
Description
Rejuvenates and Restores Dry Erase Board Cleanly, Ins, Economical Whiteboard Coating Agent, 1.3 fl oz (38 ml) (Approx. 13 - 15 Sheets) with Accessories
ins Value Whiteboard Coating Agent 1.3 fl oz (38 ml) (Approximately 13 to 15 Sheets) Includes Accessories "Clean Whiteboard! To restore and restore your whiteboard, and repair your whiteboard: When the whiteboard becomes non-fading, it can be coated to restore the whiteboard surface and restore the ease of erasing.Makes dry erase boards clean and easy to erase.The effect will last for a long time. The coating is clear.Ready to apply.Also includes all necessary accessories to applyComes in a plastic box for convenient storage. Easy to workIt takes 10 minutes to complete any woman or man.Drying time is over 8 hours. In Dry Erase Coating is available in 3 types: 1.2 fl oz (38 ml), 2.0 fl oz (58 ml), and 4.6 fl oz (118 ml).Consider how many whiteboards you use. 1 dose is a dry erase size of 70.9 x 35.4 inches (180 x 90 cm).Depending on your whiteboard, you may need to apply 2 to 3 coats
~Very easy to use! ~ Step 1 (Prepare: Clean whiteboard) Step 2 (Apply: apply coating)
■Step 1 Clean the surface of the whiteboard. Be sure to wipe it thoroughly with a damp cloth. If there are any stains such as invisible hands or fingers grease, sticky tape marks, please use a mild detergent or alcohol to clean it.After using a mild soap or alcohol, please make sure to wipe it with water to avoid any residue. ■Step 2 Wrap the rice around the included sponge and apply about 1 cc (10 drops) of coating. Note: If the coating is overapplied, it will take some time to wipe and dry the next process.If possible, stretch thin.
Step 3 (painting horizontally) Step 4 (painting vertically)
■Step 3 ■Step 4 Apply with a thin spread.Because it is difficult to see the marks applied with clear liquid, please apply the light reflections and do not leave any residues or unevenness. Horizontal and vertical application is for as much as possible with less residue and paint unevenness. If the coating does not stretch out, add the coating fluid again. Note: If the coating is overapplied, it will take some time to wipe and dry the next process.If possible, stretch thin.
Step 5 (wipe: wipe off with a little) and step 6 (dry).
■Step 5 Lightly wipe the cover with the included cloth (towel).Note: Please do not scrub the product.It will fall off. ■ Dry procedure 6 or more 8 hours.The longer the longer, the firmer it is.If you write and look at it still hard, then let it dry for another day.