Feature(may vary by option.)
●This is 1.1 inches (27 mm). Available sizes: 0.57 / 0.69 / 0.91 / 0.99 / 1.99 / 1.99 inches (12 / 15 / 23 / 27 / 35 /
●Rubber pacer that can be put into general-purpose springs. It can be used on most vehicles with coil suspension including Toyota, Honda, Nissan, Suzuki, Daihatsu, Mazda, Benz, BMW and other manufacturers. Installation is a custom part that can be easily installed by yourself as it simply snaps into the spring
●By physically limiting the amount of stroke on the coil suspension, it can be used as a countermeasure to prevent shock caused by the car height adjustment kit or the bottom of the down suspension. It reduces the disadvantage of deterioration of riding comfort caused by lowering the height of the car and makes it comfortable to ride. It can also be used as a balancer for front and rear balancing by raising the height of the car when the front and rear car height is not matched
●There are many sizes available, so you can choose the height (thickness) that suits your purpose and purpose. Choose a spacer that is close to the gap in the spring when you want to increase the height of your vehicle and to reduce noise due to excessive sinking and noise reduction in the vehicle without lifting. If you want to increase the height of your vehicle, please choose a spacer that is close to the gap with the spring stretch. The thicker the product the higher the height of the car
●Even if you feel frustrated with the comfort and appearance of your car height or downsus, it is extremely expensive and difficult to get back to the original product, this product is an affordable product. Please note that it cannot be attached to the leaf spring or air suspension (air suspension) part. Installation is very easy, but if you are not confident please ask a shop for yourself. Instruction manual not included. Those who do not have knowledge or technology may cause failure, so please always ask a professional or mechanic
[27mm]
[15mm]
[12mm]
[23mm]
[35mm]
[47mm]
Description
Available sizes: 0.57 / 0.69 / 0.91 / 0.99 / 1.99 / 1.99 inches (12 / 15 / 23 / 27 / 35 /
Rubber pacer for general purpose springs. It can be used on most vehicles with coil suspension including Toyota, Honda, Nissan, Suzuki, Daihatsu, Mazda, Benz, BMW and other manufacturers. Installation is a custom part that can be easily installed by yourself as it simply snaps into the spring. No special tools required.
By physically limiting the amount of stroke on the coil suspension, it can be used as a countermeasure to prevent shock caused by the vehicle height adjustment kit or the bottom of the down vehicle that has been lowered down by the downsus, reducing the disadvantage of worsening riding comfort and making the ride more comfortable. It can also be used as a balancer for front and rear balancing by raising the height of the car when the front and rear car height is not matched.
There are many sizes available, so you can choose the height (thickness) that suits your purpose and purpose. Choose a spacer that is close to the gap in the spring when you want to increase the height of your vehicle and to reduce noise due to excessive sinking and noise reduction in the vehicle without lifting. If you want to increase the height of your vehicle, please choose a spacer that is close to the gap with the spring stretch. The thicker the product the higher the height of the car.
Even if you feel frustrated with the comfort and appearance of your car or downsus, it is hard to get it back to the original product, but this is an affordable product. Please note that it cannot be attached to the leaf spring or air suspension (air suspension) part. Installation is very easy, but if you are not confident please ask a shop for yourself.
Instruction manual not included. Those who do not have knowledge or technology may cause failure, so please always ask a professional or mechanic. We are not responsible for any problems or failure caused by our own work. Thank you for your understanding.