Feature

●Compatible models: Jimney (JB64W) 18.07 - (Type 1 - / R06A Turbo/5MT/4AT/4WD
●JB64W exclusive product. Does not fit JB74W
●High grade height up spring that balances elevation, riding comfort and handling
●A coil spring set that increases the height of about 0.8 inch (20 mm) for both daily riding and cross-country riding
●High Quality: This product has been carefully developed to create a supple stroke with less mess and noise. It is also produced at a factory where the suspension spring manufacturing for mass produced cars in Japan. Made in Japan quality with reliable construction


Description

High grade height up spring that balances elevation, riding comfort and handling
A coil spring set that increases the height of about 0.8 inch (20 mm) for both daily riding and cross-country riding.
Developed for use with normal compatible shock absorbers (normal length).

■Style
About 20mm height up (liftup) brings out the wild charm of Jimney
Increased ground clearance for off-road riding and control
■Riding comfort
Ensures the ride and silence you need for street use.
Considering the attenuation force properties of normal shock absorbers balanced spring characteristics.
Add the shock absorber set with a dampening force adjustment mechanism (sold separately) to bring out a more textured ride
■Handling
Optimized spring properties ensure stability and excellent stability even when the higher center of gravity as high as it heights.
■Cost-performance
This item is fully bolt-on to normal. Lateral rods and brake hoses can be installed normally.
Balance the area without the need for any modification or modification to ensure satisfying customization at a fraction of the cost.
■ Quality of attention
This coiling design incorporates not only the wire material, but also the unique know-how to measure the diameter of the wire and the winding of each wind. It is carefully developed to produce a supple stroke with less mess and noise.
In addition, it is manufactured in a Japanese mass production car suspension factory using high grade high strength spring steel. Made in Japan quality with reliable construction.
Thanks to its legendary JB23W has been a long-selling seller for over 20 years. After that time, we deliver quality assurance.

Compatible models:
Jimney [JB64W] 18.07~ (Type 1~3)/R06A Turbo/5MT/4AT/4WD *1

Fitment Precautions
The effects of radars and camera sensors on vehicles equipped with safety support and equivalent functions. (including brake support, impact reduction, malfunction) are not considered to be considered.
(We have designed this product to be difficult to generate checking lights on and fail-safe operations in normal safe driving range.)

Specifications:
Spring Constant (N/mm kgf/mm): Front 20.5 (2.1), Rear 23.5 (2.4)
Vehicle height change (normal ratio reference): 0.08 inch (2 mm) front + 1.0 inch (25 mm) rear + 0.8 inch (20 mm)
Minimum ground height (for reference only) *2, *3 mm (8.9 in) (225 mm)
Bump cushion specifications: Normal product (unprocessed)
Other: Conforms to safety standards *3

1 JB64W exclusive product. Does not fit JB74W
2. Numbers are reference data from JB64W Jimney 5MT XC grade (if fuel is packed without passenger). It may vary depending on vehicle specifications (grade, presence of overcharger, driving method, vehicle individual difference, tire outer diameter, etc.), equipment and luggage condition, fuel loading, etc.
3. Reference data for applicable areas relating to the safety standards of the Road Transport Vehicle Act as of December 30 (H). The measurements are measured in 0.2 inch (5 mm) increments on the safety side. In addition, it is only necessary to use the designated installation and adjustment method. Please note that the combination of aerodynamic parts and exhaust parts are attached simultaneously.
Please refer to other precautions

[Precautions]
When installing this product (mounting parts that change in height of vehicles), proper alignment and optical axis adjustment is required.
Please check the Monster Site for cars equipped with genuine LED headlights.
To set your headlight auto-leveling system for this vehicle, you will need a special tool (SUZUKI scan tool "SUZUKI-SDT II" or a substitute diagnostic tool)
There are no effects associated with this product on the installation of various camera sensors and sensing radars, including collision reduction brakes (pre-crash safe system/radar brake support), and incorrect initiation suppression functions. Due to car height changes, vehicle posture, radar irradiation range, camera recognition range, etc. may affect the control and operation depending on the situation. (Only compatible with the product, we have designed this product with difficult specifications for check lights on and fail-safe operation in normal safe driving range. )
Product specifications may change or discontinue without prior notice.
When this product is installed, the responsiveness (steering response) of the steering operation will be increased. In addition, despite the installation of this product, if you change the height (center of gravity) due to replacing large diameter tires or suspension, it may lower the stability of the vehicle or make it easier to operate stability control before the change. For safety, please do not operate it suddenly.



From the Manufacturer



11

High grade height up spring that balances elevation, riding comfort and handling

Product Features:

Style: About 20mm height up (lift-up) brings out the wild charm of Gymny.

Riding: Ensure the ride and silence you need for street use.

Handling: Optimized spring properties ensure stability and excellent stability even when the higher center of gravity as the height up.

Cost-effective: This product is completely bolt-on to normal.Lateral rods and brake hoses can be installed normally.

High Quality: This product has been carefully developed to create a supple stroke with less mess and noise.It is also produced at a factory where the suspension spring manufacturing for mass produced cars in Japan.Made in Japan quality with reliable construction.

! Note:

When installing this product (mounting parts that change in height of vehicles), proper alignment and optical axis adjustment is required.

Please check the Monster Site for cars equipped with genuine LED headlights. To set your headlight auto-leveling system for this vehicle, you will need a special tool (SUZUKI scan tool "SUZUKI-SDT II" or a substitute diagnostic tool)

There are no effects associated with this product on the installation of various camera sensors and sensing radars, including collision reduction brakes (pre-crash safe system/radar brake support), and incorrect initiation suppression functions.Due to car height changes, vehicle posture, radar irradiation range, camera recognition range, etc. may affect the control and operation depending on the situation.(Only compatible with the product, we have designed this product with difficult specifications for check lights on and fail-safe operation in normal safe driving range.)

Product specifications may change or discontinue without prior notice.

When this product is installed, the responsiveness (steering response) of the steering operation will be increased.In addition, despite the installation of this product, if you change the height (center of gravity) due to replacing large diameter tires or suspension, it may lower the stability of the vehicle or make it easier to operate stability control before the change.For safety, please do not operate it suddenly.

Product description

High grade height up spring that balances elevation, riding comfort and handling
A coil spring set that increases the height of about 0.8 inch (20 mm) for both daily riding and cross-country riding.
Developed for use with normal compatible shock absorbers (normal length).

■Style
About 20mm height up (liftup) brings out the wild charm of Jimney
Increased ground clearance for off-road riding and control
■Riding comfort
Ensures the ride and silence you need for street use.
Considering the attenuation force properties of normal shock absorbers balanced spring characteristics.
Add the shock absorber set with a dampening force adjustment mechanism (sold separately) to bring out a more textured ride
■Handling
Optimized spring properties ensure stability and excellent stability even when the higher center of gravity as high as it heights.
■Cost-performance
This item is fully bolt-on to normal. Lateral rods and brake hoses can be installed normally.
Balance the area without the need for any modification or modification to ensure satisfying customization at a fraction of the cost.
■ Quality of attention
This coiling design incorporates not only the wire material, but also the unique know-how to measure the diameter of the wire and the winding of each wind. It is carefully developed to produce a supple stroke with less mess and noise.
In addition, it is manufactured in a Japanese mass production car suspension factory using high grade high strength spring steel. Made in Japan quality with reliable construction.
Thanks to its legendary JB23W has been a long-selling seller for over 20 years. After that time, we deliver quality assurance.

Compatible models:
Jimney [JB64W] 18.07~ (Type 1~3)/R06A Turbo/5MT/4AT/4WD *1

Fitment Precautions
The effects of radars and camera sensors on vehicles equipped with safety support and equivalent functions. (including brake support, impact reduction, malfunction) are not considered to be considered.
(We have designed this product to be difficult to generate checking lights on and fail-safe operations in normal safe driving range.)

Specifications:
Spring Constant (N/mm kgf/mm): Front 20.5 (2.1), Rear 23.5 (2.4)
Vehicle height change (normal ratio reference): 0.08 inch (2 mm) front + 1.0 inch (25 mm) rear + 0.8 inch (20 mm)
Minimum ground height (for reference only) *2, *3 mm (8.9 in) (225 mm)
Bump cushion specifications: Normal product (unprocessed)
Other: Conforms to safety standards *3

1 JB64W exclusive product. Does not fit JB74W
2. Numbers are reference data from JB64W Jimney 5MT XC grade (if fuel is packed without passenger). It may vary depending on vehicle specifications (grade, presence of overcharger, driving method, vehicle individual difference, tire outer diameter, etc.), equipment and luggage condition, fuel loading, etc.
3. Reference data for applicable areas relating to the safety standards of the Road Transport Vehicle Act as of December 30 (H). The measurements are measured in 0.2 inch (5 mm) increments on the safety side. In addition, it is only necessary to use the designated installation and adjustment method. Please note that the combination of aerodynamic parts and exhaust parts are attached simultaneously.
Please refer to other precautions

[Precautions]
When installing this product (mounting parts that change in height of vehicles), proper alignment and optical axis adjustment is required.
Please check the Monster Site for cars equipped with genuine LED headlights.
To set your headlight auto-leveling system for this vehicle, you will need a special tool (SUZUKI scan tool "SUZUKI-SDT II" or a substitute diagnostic tool)
There are no effects associated with this product on the installation of various camera sensors and sensing radars, including collision reduction brakes (pre-crash safe system/radar brake support), and incorrect initiation suppression functions. Due to car height changes, vehicle posture, radar irradiation range, camera recognition range, etc. may affect the control and operation depending on the situation. (Only compatible with the product, we have designed this product with difficult specifications for check lights on and fail-safe operation in normal safe driving range. )
Product specifications may change or discontinue without prior notice.
When this product is installed, the responsiveness (steering response) of the steering operation will be increased. In addition, despite the installation of this product, if you change the height (center of gravity) due to replacing large diameter tires or suspension, it may lower the stability of the vehicle or make it easier to operate stability control before the change. For safety, please do not operate it suddenly.

Product information