This set combines the Premium Soft GND 0.9 100x150mm in Frame which allows you to create a natural gradient with the wide angle lens.Comes pre-installed with a dedicated filter frame for immediate use with the HT100 IV holder.
The HT100 IV holder uses the "Magnetic Adapter Ring HT100IV-S82-M95" adapter ring compatible with magnet type special filter attachments, and comes with a dedicated CPL
KANI square filter coating is extremely water repellent, oil repellent, and stain resistant, and is a premium coating that effectively reduces harmful flare and ghosting when shooting in backlight.
This set is mounted on an aluminum frame, making it easy to handle filters even in harsher environments.
The package photo of this filter set is taken from Chido Koudo.
|
|
|
---|---|---|
HT100IV Filter HolderHT100IV Series 100mm filter holder using a filter frame system. This product comes with a magnetic adapter ring to accept CPL filters. |
Premium Soft GND0.9 100X150mm in frameND8 Half ND FilterThe gradient width in the middle is 2.0 inches (5 cm) wide, so it can be used with a wide range of lenses without obscuring the boundary. The aluminum frame has been added to the outer circumference of the filter to prevent damage caused by drops, as well as greatly improve operability. |
Premium CPL0# HT100IV-M95PL filter for holder. Magnet attaches and detaches from the front of the adapter ring. Adopts the latest polarized membrane for an extremely neutral color.The effect can be adjusted by the gear on the outer frame of the holder. |
HT100 IV Filter Holder
Magnetic Adapter Ring HT100IV-S82-M95
CPL 0# HT100 IV-S82-M95
Premium Soft GND 0.9 100x150mm in Frame
Step up ring set (67-82mm/72-82mm/77-82mm)
4 x 2 Slot Set Screws (12mm)
The contents of the product are the same as the "HT100 IV Challenge Set Portrait Model".
|
|
|
|
---|---|---|---|
1. Put the adapter ring on the lensAttach the included adapter ring (HT100IV-S82-M95 ring) to the filter screw on the end of the lens. |
2. Install CPL filter if necessaryIf you want to use the included CPL filter, you can install it from the front of the ring. |
3. Attach the outer frame of the holder.When the outer edge of the adapter ring is hooked to the nail in the outer edge of the holder frame it will be held in place by the spring. |
4. Install the square filterInsert the square filter into the slot of the frame object holder. |
The popular neoprene holder case continues to be used in the HT100 IV system.The texture of the fabric and the operation of the zipper is preserved.
Improved holder body is thin and has been improved to be more resistant to vignetting
The aluminum frame is added to the outer circumference of the filter to prevent damage caused by drops, and greatly improve operability.
The dedicated CPL filter uses a magnetic system from the front of the adapter for easier removal and removal.
As with previous models, the filter slot can be changed from 3 to 2 frames.
The included adapter ring can be attached directly to the lens with a filter diameter of 82mm.For 67mm/72mm/77mm lenses, use the included step-up ring.
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|
Challenge Set Landscape Models / Portrait Models | Starter Set | Standard Set | Premium Set | |
Price | ¥52,800¥52,800 | ¥74,800¥74,800 | ¥113,800¥113,800 | ¥156,800¥156,800 |
HT100IV 100mm Holder | ✓ | ✓ | ✓ | ✓ |
CPL | ✓ | ✓ | ✓ | ✓ |
Premium Soft GND | 0.9 | - | 0.9 | 0.9 |
Premium Medium GND | - | - | - | - |
Premium Hard GND | - | - | - | 0.9 |
Premium Reverse GND | - | - | 0.9 | 0.9 |
Premium Dual Purpose GND | - | 0.75 | - | - |
ND | - | 128 | 16 / 128 | 16 /128 / 1000 |
Others | - | - | - | - |