The ultra-fine polishing particles are approximately 10 times the normal ratio to remove scratches and dings from your car and restore and restore the original shine of your car.
It does not contain any coarse abrasive particles and does not polish too much, so it can be used safely even for dark cars who are considered difficult for beginners.
Perfect for removing car scratches, removing car washes, underlaying before coating, and restoring the shine of rough painted surfaces.
Car Scratch Polishing Compound/Extra Cut 3.5 oz (100 g)
Despite the normal ratio of abrasives in the compound is about 5-6%, the high quality fine polishing particles with excellent grinding power, and more than 50% of the industry common phenomenon.It has a high reputation for the "polishing compound" and is the perfect compound for high quality scratches and polishers.The container may deform (dented) when stored in a sealed state, but this is not a quality problem.Please consult a professional for scratches that may catch claws.Please check the included manual before installing.
This compound is perfect for removing car scratches, submersion before coating and restoring and restoring rough painted surfaces.
You can polish the scratches by hand or polisher.
If you are unsure about the degree of scratches or stains, it is recommended to use a mirror finish to polish it first.
If the conditions dont develop even after multiple times while checking out, it is best to change to extra cut to polish and repolish the finish with a mirror finish.
● About compounding selection●
If your car is light colored such as white, pearls, and silver = Extra cut alone.
If your car is dark colors such as black, navy blue, red = Extra Cut → Mirror finish is best polished.
If you have both compounds, try with a mirror finish first, and use the extra cut depending on the condition of the scratch.
|
|
|
|
---|---|---|---|
When wet the sponge is used to reduce powder.Before polishing, be sure to remove iron powder and wash shampoo vehicles. 1. Shake the bottle well and add an appropriate amount (about 1-3 drops of adzuki beans). |
Polish straight without polishing methods like a circular effect.2. Point the 11.8 inches (30 cm) square. Use the entire surface of the sponge to polish both vertically and horizontally as possible. When the compound has dried, you can use a mist spray to water it to further polish it. |
Polish → Check repeatedly.3. When the compound becomes invisible, wipe it up and check its condition. Repeat between 2 and 3 several times, and gradually improve the state of the product. Please be careful not to apply too much force or polish too much. |
■ Installation pointsIt is important to polish it until the compound is not visible. If necessary, mask before installation. Polishing is recommended for a wide range of applications. |
Car Scratch Polishing Compound/Extra Cut Perfect for Car Wash Scratch Removal, Scuff Polishing, Car Dull and Coating Priming Compound
If you have trouble with scratches or dullness in your car, please use it.
[Compound for Mirror Finishing] For polishing the finish after removing scratches from dark colored cars, etc. Mirror Finish, 3.5 oz (100 g) | [Scratch Elimination Compound] Eliminates Car Wash Scratches, Wipes, and Dizziness, Extra Cut (14.1 oz (400 g) | [Compound for Mirror Finishing] Mirror Finish (14.1 oz (400 g) for removing scratches and polishing on dark colored vehicles. | Hybrid Nano Glass: Compound hand polishing and tire care. 2 x Power sponges for removing scratches and polishing mirror finishes. | |
---|---|---|---|---|
Customer Reviews |
3.9 out of 5 stars
277
|
4.2 out of 5 stars
3
|
4.4 out of 5 stars
11
|
2.0 out of 5 stars
1
|
Price | ¥2,480¥2,480 | ¥6,300¥6,300 | ¥6,300¥6,300 | ¥1,980¥1,980 |
Application | Compound for Final Polish and Mirror Finish Polish | Compound for Scratching and Scratching | Compound for Final Polish and Mirror Finish Polish | Compound Polishing Sponge |
Capacity | 100g | 400g | 400g | Set of 2 |