Feature(may vary by option.)

●Make your car or furniture shiny: Not only can it be used to remove scratches and polish wax on your car body and headlights using a compound but also cleaning baths, mirrors, kitchens, furniture and stainless steel products are also shiny!
●Compatible with various polishers: It can be used with single action, gear action, double action (random action) electric polishers, and hand polishers
●Versatile Soft Type: Wool buffs with strong polishing power can accidentally scratch your car and have a narrow application, but the soft sponge (urethane foam) buffs can be used for a variety of purposes
●Set Includes: 6 x Buff / 3 x Microfiber Cloth (11.8 x 11.8 inches (30 x 30 cm)) / 1 x Masking Tape (6.6 ft (20 m) / Japanese Instruction Manual / Size: Diameter 4.9 inches (125 mm), Thickness 1.2 inches (30 mm)
●Though there are an increase in Chinese sellers, our company is a Japanese dealer, so even if there is any defects, Japanese staff will be able to respond to our products with good faith

[4 125mm]




[2 125mm]




[6 125mm]





Description

(Be sure to check before working! ]

Before applying compound polishing or waxing with an electric polisher or hand polisher, make sure to check the following contents to avoid mistakes.

(Use wool or hard sponge buffs for deep scratches)

If your body is deep, use medium, rough or fine compound with a strong abrasive force to remove the scratches with wool or hard sponge buffers.

After some deep blemishes disappear, polish it clean with our soft type sponge buff.

(Try it out from an inconspicuous area first)

Body conditions and compound types may vary.

Work from a relatively inconspicuous area to make sure it is no problem.

[1] Clean car[1] Clean car

1. Wash your car cleanly.

Start by washing your car cleanly.

If there is some pebbles or dust left in this time, it may cause unevenness in the finish or become uneven so clean it thoroughly.

Also effective with high pressure washers such as Kärcher

[2] Clean the moisture thoroughly.[2] Clean the moisture thoroughly.

2. Wipe off moisture thoroughly.

When the car is finished, shake it up as soon as possible with the included microfiber cloth.

Droplets dry and leave limescale residue, or work without wiping off water will cause failure.

[3] Masking unnecessary areas[3] Masking unnecessary areas

3. Masking unnecessary areas

Use the included masking tape to mask areas that do not require polishing or waxing.

By firmly masking the gap in the body, you can prevent the compound from clogging.

[4] Polish with polisher buff.[4] Polish with polisher buff.

4. Polisher buffing

Polishers include single action, gear action, double action (random action), but if you press it harder, it will scrape your body more than necessary, so please put it on and polish it as to draw an arc.

Common Failures

[Common Failure] The compound is splashing out.[Common Failure] The compound is splashing out.

[Common failure] Leave a compound[Common failure] Leave a compound

[Common failure] Compound clogs[Common failure] Compound clogs

[Common Failure] Cords get scratched[Common Failure] Cords get scratched

The compound spatters

Always apply compounds and wax to your body and start working.

When applied to the buff the polisher will cause liquid and paste to splash.

Leaves compound

Make sure to use compounds and wax all the way up to the end.

Leaving a small amount of liquid and paste will harden and become undetected.

Compound clogs

It is hard to remove if you lazy masking, the compound or wax gets stuck in the gap of your body or headlight.

Make sure to mask in small detail before working.

Cord scratches

Please be careful when handling the cord with an electric polisher to prevent the cord from scratching your body.

If the cord is short, you need a longer extension cord.