[1.0 kilogram]

[3.0 kilograms]

[Features of Super Putty #180]
1.Fine texture, the smoothness of the putty surface is very suitable for finishing
2. Spatula elongation, slice spatula, excellent spatula work.
3. Compatible with a variety of steel plates, such as high tensile steel plates, rust proof steel, aluminum plates, stainless steel, etc.
4. Grinding time is faster, no need to worry about clogging, and can be repaired in a short time.
It can be heated immediately and shaved well even after forced drying, and it will greatly improve workability.
5. The edges are much easier to get and better finish is easy.

[Use]
Automobile steel plates (high tensile steel plates, rust resistant steel plates, aluminum alloys, general steel plates, etc.).

(Product Details)
Extreme Intermediate Putty 180 Standard 2.2 lbs (1 kg)
F-10 hardening agent, 1.1 oz (30 g)
Instruction manual (English language not guaranteed).
The putty is plain cans and the hardener will be repacked in PE container for delivery.

How to Use:
1. Fully substrate treatment such as polishing (P80-P120 paper) and degreasing, and putty immediately after polishing.
2. Add the designated hardener "F-10" to the main agent at a ratio of 2-3%, and kneading.
3. Apply the putty first to thoroughly blend the putty into the ground paper, then apply to the desired thickness.
4. Grinding is possible in about 30 minutes (20 degrees Celsius). Use sequentially fine paper to finish it.

Precautions for Use:
1. Hardener is too small or too much will cause failure. Please use the appropriate amount of specified hardener.
2. Before use, the main agent should be thoroughly mixed until uniform and rub the hardener thoroughly before using.
3. Cure time may vary slightly depending on temperature. Hardening is noticeably delayed during temperatures below 12°F (5°C), so please forced dry.
5. The main agent is sealed and stored in a cool, dark place (below 67°F (25°C) and below) away from fire or direct sunlight.