Feature(may vary by option.)
●This product is a multifunctional suction pump that integrates functions such as changing water, cleaning sand, removing residue from fish droppings, algae and fish bait to oxygenate water, filtering impurities, sewage suction, and cleanliness. Easy to install, easy to use, versatile and a must have for any breeding enthusiast. The lifting height is 9.8 ft (3 m), so you can put water in the aquarium, even in low places. Even if you raise a giant dragonfish, you dont have to worry about changing the water. The body can be freely adjusted from 21.7 to 47.2 inches (55 to 120 cm), so you dont have to worry about getting your hands wet even when you change water to a very deep and large aquarium. 20W high output, powerful suction, labor-saving, and less hassle
●Unlike normal 110V voltage, this product has a voltage of 24V. It is very safe and will not damage human body or fish, but also worry about leakage. It comes with a transformer that can mark a wide voltage of 100-220V, and can be used in most countries and regions such as China, Japan, USA. High performance and low water level requirements, the water must be submerged in a gray circle before the machine starts. When the flat suction port is connected, the minimum water level is 4.7 inches (12 cm). If the suction port is not connected, you can start at least 2.0 inches (5 cm). The minimum water level in the aquarium can be pumped up to 0.2 inches (0.5 cm)
●You can freely switch between various suction ports to meet your different needs. Round suction port is suitable for aquariums with landscape sand. 45 degree angle design and 3D shape prevent motor clogging caused by gravel sucking. The flat suction port is suitable for aquariums without underwater landscapes. Rotates 360 degrees freely, allowing you to breathe away and residue from the corners and bottom of your aquarium. The transparent sand cleaning head can clean sand in the aquarium, and keep the water quality in the aquarium
●4.9 ft (1.5 m) corrugated tube and 16.4 ft (5 m) / 32.8 ft (10 m) silicone tube are The pipe has no peculiar smell, not stiff even in cold winter, convenient to store. The filter is applied to allow impurities to be filtered through the filter, preventing water in the aquarium, circulating the filtration, purifying the water quality and conserving water. 5m long thick power cord with independent safety switch, better safety performance. The handle is specially designed to prevent slipping and also save labor
●The base is also a suction port, so it can absorb impurities on the bottom of the aquarium. Suction cup on the bottom allows you to secure it to the aquarium when you do not change the water. Avoid idle, save space and avoid storage trouble. When used in conjunction with the shower head, the shower head sits 10 cm above the surface of the water to oxygen the water in the aquarium. Shower head can also be adjusted to flow
[EB-012 10m Silicone Tube]
[EB-012 1.5m Pipe]
Description
Introduction
This product is a multi-functional sewer suction pump that integrates the functions of water change, sand cleaning and sewer suction. Easy to install, easy to use, comes with various accessories to meet your different needs.In addition, you can put it in the aquarium to promote circulation and oxygenate the water.One pump is versatile and is a must have for fish lovers.
Packing List:
Removable motor and plumbing + 5m power cord + transformer + 1.5m/5m/10m water exchange pipe + flat suction port + round suction port + filter bag + shower head + base
Precautions
1.Male and female plugs and power switches are not allowed to be placed in the water.Otherwise, there is a risk of electric shock.
2. Please refrain from using non-regulatory voltages and frequencies according to the designated voltage and frequency.
3. When started, the water supply port of the main unit must be submerged in water and pumped up with a pump.Otherwise, the machine may burn out.
4. Please do not leave the host away from water during use.Otherwise, it will not be able to get into the air
5. Suitable for freshwater or saltwater use only, do not use on flammable liquids.
6. If the power cord is damaged, please do not use continuously for safety.
7. Do not use over 35 degrees Celsius or below 0 degrees Celsius.Otherwise, it may damage the body.
Specifications
- Power: 20W
- Voltage: 12 (V)
- Power Supply: Power supply.
- Packing size:
- 4.1 x 3.9 x 23.0 inches (10.5 x 9.8 x 58
- Length: 55-120cm adjustable
- Water Flow: 23.8 gal/ h (1,000
- Water change height: 9.8 ft (3 m)
|
|
|
|
|---|---|---|
Disassemble motorIt can be disassembled without any tools and can easily clean impeller residue. |
Independent SwitchPower cord has independent switch, more convenient and safe. |
Shower and Filter Bag CombinationWhen filtering impurities, water will not decrease |
|
|
|
|
|
|---|---|---|---|---|
| 12V Water Change Pump | 12V Water Change Pump | 12V Water Change Pump | 110V Water Change Pump | |
| Customer Reviews |
— |
2
|
2
|
13
|
| Price | ¥8,680 | ¥10,480 | ¥12,880 | ¥6,675 |
| Flat suction port | ✓ | ✓ | ✓ | ✓ |
| Round suction port | ✓ | ✓ | ✓ | ✓ |
| Sand Wash Head | No | No | No | ✓ |
| Filter Bag | ✓ | ✓ | ✓ | ✓ |
| Transformer | Yes | Yes | Yes | No need |
| Water change height | 3m | 3m | 3m | 1.5m |
| Pipe | 4.9 ft (1.5 m) Corrugated Tube | 5m silicone tube | 10m silicone tube | 4.9 ft (1.5 m) Corrugated Tube |
| Power Cord Length | 5m | 5m | 5m | 3m |
| Applicable | Extra Large Super High Aquarium | Extra Large Super High Aquarium | Extra Large Super High Aquarium | Large, medium and small aquariums |