Feature

●Semi-Demon Cambolt, 2° - 3.5° (2° - 3.5° C), Black, Set of 2, Semi-Can Type
●Compared to the standard camber bolt adjustment width (approximately), our Demon Canvas Bolt is an amazing 2 to 3.5 degrees!!
●Simply replace the bolt to achieve this camber angle
●Replace 1 unit on one side → about 2 ° or 2 replacement on one side → about 3.5 ° or more when needed. Please purchase 2 sets as needed


Description

Semi-Demon Cambolt, 2° - 3.5° (2° - 3.5° C), Black, Set of 2, Semi-Can Type

Features:
The width of common camber bolts is adjusted to 1.75 degrees.
Our Demon Campbolt is an amazing range of approximately 2 to 3.5 degrees.

Just replace the bolt to achieve this camber angle.

One side can be replaced → about 2 degrees.
Replace 2 on one side → about 3.5 degrees

Buy 2 sets if needed.

Recommended for those occasions: ]
■ For more camber angles than typical camber bolts

■ After the introduction of the Weatre, the tire and wheels protrude from the fender.

■ Improve cornering performance and steering feel

■ The adjustable width of the upper mount is not enough for the camber angle.

■ The camber angle is too hard to wear the tires.

[Precautions]
Please be sure to use it for temporary purposes such as events and photographs.
Instruction manual not included.
There may be scratches or stains as it is imported.
Alignment adjustment is recommended after installation.
This is a strut type product.
·We will disclaimer for damage or factory fees caused by installation of this product.
Please use at your own risk.