Material:
Center Pin: Quick milled copper (Tellu copper) (minimum 99.0%, C14500)
Ground Sheet: Tough Pitch Copper (minimum 99.5%, C1100)
Body: Glass fiber reinforced nylon resin (red/white).
Shell: Copper Zinc Alloy (C3604)
Screws: Iron
Surface treatment:
Center Pin: Nickel Free Silver Plated (120u").
Ground Sheet: Nickel Free Silver Plated (120u").
Shell: Satin nickel plated, hairline finish, cut process to engrave logo.
Screw: Nickel Plated
Size:
Maximum outer diameter: 0.5 inches (13.7 mm)
Total length: 1.7 inches (43.7 mm)
Hole Diameter: If black polyacetal is attached to the hole diameter is 0.3 inches (8.5 mm).
If black polyacetal is not included, the hole diameter is 0.4 inches (10.5 mm).
Packing Method:
Vacuum Bags
We comply with RoHS directives for the production of our products.
Our products comply with Taiwan New Model M463447 license.
Recommended soldered temperature
Soldering Iron Temperature 380 Degrees C, 05-08 Sec.
Soldering Iron Temperature 360 Degrees C, 09 to 13 Seconds
Soldering Iron Temperature 340 Degrees C, 13-18 Seconds
Soldering Iron Temperature 320 Degrees C, 19-25 Seconds
*We recommend the soldering iron with temperature adjustment.