Tabletop Saw Machine SSC-400PE

Low vibration and noise design.

Heavy weight and excellent stability.

Table angle adjustment

The table is slanted so it can be cut diagonally.

1. Check the right angle of the saw blade and table with a ruler.

2.If necessary, please loosen the table fixing knob to adjust the table angle.

3. Tilt table up to 45 degrees.

Pusher height and angle adjustment

Comes with a pusher to prevent wood from bouncing.

Adjustable height by loosening the pusher fixing knob bolt.Can be raised up to 2.0 inches (50 mm) from the table.

The angle can be adjusted by loosening the pusher fixing screw.(Adjusts according to the angle of the table)

Air Blow Nozzle Adjustment

Air blow function makes it easy to see smiling lines.

You can adjust it to any angle by loosening the screw.

Connecting dust collector

Connect your dust collector to the dust collector connection for comfortable cutting work with little dust.

The connection port is located below the front of the main unit, outer diameter approx. 1.4 inches (35 mm), inner diameter approx. 1.2 inches (31 mm).

Please use the dust collector connection adapter (sold separately) if necessary.

About the Saw Blade

The thread saw blade can be easily mounted on any pin end with pins.

You can also use a pin-less thread saw blade by using the included blade adapter and a hex wrench.

About Cutting 1

When the power switch is raised up, the blade will start moving up and down.

1. Prepare a vertical wood cutting surface and use a saw blade to lightly cut the wood into a groove

2. Rotate the wood 180 degrees and place the cutting groove on the back of the blade.

3. Make sure the cut groove fits the saw blade, and adjust the table angle if it does not fit.

About Cutting Work 2

Straight cutting

Circular cutting

Corner cutting

Hollow out cutting

Long cut

By attaching the saw blade horizontally, you can insert wood from side to side, so it can be cut longer than the depth of the foot.(Dimensions of footprint): 15.7 inches (400 mm)