Product introduction
SOC: Rockchip RK3588S (8nm LP process)
CPU:
-8-core 64-bit processor
-Big.Little Architecture: 4xCortex-A76 and 4xCortex-A55, Big core clusteris 2.4GHz, and Little core cluster is 1.8GHz frequency.
GPU:
-Arm Mali-G610 MP4“Odin”GPU
-Compatible with OpenGL ES1.1/2.0/3.2,OpenCL 2.2 and Vulkan 1.2.
NPU: Built-in Al accelerator NPU with up to 6 TOPS, supports INT4/INT8/INT16 mixed operation
PMU: RK806-1
RAM: 8GB LPDDR4/4x
Memory:
-QSPI Nor FLASH 16MB
-MicroSD (TF) Card Slot
-PCle M.2 M-KEY NVMe ssD
USB:
-USB3.0×1
-USB2.0×2
-Type-c (USB3.0)×1
Video Output:
-HDMI2.1, up to 8K@60Hz
-DP1.4(DisplayPort),DP1.4 and USB3.0 ports are multiplexed,and the port is shared with Type-c
-2 *MIPI D-PHY TX 4Lane, configurable up to 4K @60Hz
Camera:
-MIPI CSI 4Lane
-2*MIPI D-PHY RX 4Lane
Audio: CODEC: ES8388
-3.5mm headphone jack audio inputloutput
-lnput: Onboard MIC
-HDMI 2.1 eARC
Wireless Network: On-board module: AP6275P
-WIFI6.0,2.4GHz/5GHz dual-band WiFi, support IEEE802.11a/blg/n/aclax protocol,2T2R
-Bluetooth 5.0, supports BLE
Ethernet: 10/100/100OMbps Ethernet (YT8531B )
Expansion Port: 26Pin double row pins supporting the following functions: 3 *UART、6 *PWM、2*12C、1 * SPI、2*CAN、17*GPIO, thesefunctions are multiplexed and cannot be supported at the same time.
PCle M.2 M-KEY Socket: The following functional modules are supported but not limited to:
-SSD module supporting PCle M.2 M-KEY NVMe
- WiFi6+BT5.0 custom module supporting PCle M.2 M-KEY
ButtonSocket:
-1×MaskROM key
-1×Recovery key
-1×On/off key
Power Source:
-Support Type-C power supply, 5V4A
-Power indicator: red
Supported os: OrangePi (Droid),OrangePi (Arch),Ubuntu, Debian,Android12