Features:
Uses a lightweight base to reduce battery drain
The black metallic fluorine coating is resistant to staining.
Unique sharp angle polishing allows light cutting.
Cutting Materials
General wood (vertical and horizontal), plywood, synthetic wood, decorative plywood, laminated wood
Lamba core (vertical and horizontal), Decora board, MDF, Particle board, etc.
[Use]
Speed model for charging circular saws.
Specifications and Standards:
Chip Saw for Charging Circular Saw
Cutting Capacity Wood Plywood: 1.8 inches (45 mm)
Outer Diameter: 4.9 inches (125 mm)
Blade thickness: 0.06 inches (1.4 mm)
Hole Diameter: 0.8 inches (20 mm)
Number of Blades: 42
Maximum RPM: 12200
Material:
Base metal: tool steel
Chip: Carbide
[Mass / Weight Units]
65g
Never touch the blade while rotating.
Direct or rolled in the case of serious injury.
Please use this product correctly according to the instructions and specifications of the machine before use.
Do not use for anything other than the intended purpose. We are not responsible for any inconvenience.
Please note:
Please install the chip saw according to the direction of the machine rotation.
The blade protective vinyl should be removed after the chip saw is installed.
Do not cut curves or prying. It can cause damage to chip saws, and is very dangerous. Please note:
In the event that abnormal sounds or vibrations occur during the cutting process, please stop working and inspect the cause immediately.
When using, please make sure to use a safety cover, safety shoes, dustproof glasses, and dust mask, etc. according to the Occupational Safety and Health Act.
Other uses that induce accidents are dangerous, so please pay attention to each specifications.