[M4]

[(1  & 4-20)]

Description: Flat head cap screws, galvanized surface, carbon steel rivet nut. This nut punch and hole log in knurling body with large flange to provide increased strength by drilling this nut punch and hole, giving you more resistance to spin out. When installed with soft material. What Rivet Nut is? Rivet nut fasteners are tubular rivets with female threads. It can be installed on one side of the artwork in the form of a second. Once installed, no finishing work is required for tightening rivets nuts. Not only is it a reliable fastener, but the added benefit is that they tapped threads too thin chin sheet material attachments. Ready to use with clean threads available with blind screws. Blind Rivet Nuts are also used when the application has little or no access to the backside so they can be installed from the front of the workpiece. How to do Rivet Nuts? It engages the threads of the rivetnut fastener to the hands and power tool pull studs, and inflates firmly to the material where the shaft is fixed. Disrupt Rivet Nut Fasteners with specific steps as follows: Step 1: Step 3 Spin on Rivet Nut Step 2 Insert into Hole Step 4: Remove Press and Sway Rivet Nut, Gun Step 5: Install Screw Bolts