Feature

●調整可能な温度
●タイマー


Description

Infrared Carbon Heater
For sheet metal, paint, and drying your car.
The drying angle can be freely moved from left to right up and downward.

Product Details:
Product Size (Approx.): Refer to the images.
Weight: Approx. 55.5 lbs (26 kg).

Rated Power: Single-phase 1,100 W x 2 lights, 100 V, 50/60 Hz (PSE certified)
Baked Area (Approx.): 31.5 x 39.4 inches (800 x 1000 mm).

Switching function: 1 and 2 lights can be adjusted with a switch.
Timer function: Up to 60 minutes and 10 minutes intervals.
Temperature setting: 0 - up to 100 degrees Celsius

The breaker may fall, so please be sure to use it within a range that will not fall off.
In case of falling off frequently, please ask an electrician for direct connection. Please note that we cannot arrange this product.
If an extension cord is used, the voltage may be unstable and may result in a bad operation.

The outlet has a ground plug.
If used with household power supply, you will need a conversion plug.
The conversion plug is not included, so please prepare it for you.

▲▲This product will be shipped by 2 units. ▲▲▲
Please note that due to the convenience of the shipping company, it may arrive separately.



Please be aware of this before purchasing.
Depending on the arrival time, the design and specifications may vary slightly.
As measurements are taken by hand, slight variations may occur.
As this is an imported product, there may be small scratches, scuffs, dirt, deformation, logs, uneven sewing, etc.
Instruction manual and installation instructions are not included.
● Sale only, so inquiries in handling and installation methods cannot be accommodated.
●We are not responsible for any damage or failure of other products caused by using this product.
● We are not responsible for any damage caused by accidents or installation mistakes during operation.
The color of the actual product may differ slightly from the images depending on your monitor settings, shooting locations and images.




■■About shipping costs ■■
In general, free shipping is required, but additional fees may be required for some local customers.

[Standard product]
For Tohoku (Aomori, Akita, Iwate, Yamagata, Miyagi, Fukushima), we will need an additional cost of $500 yen.
For Hokkaido, additional fees will be required for the shipping cost of 1,000 yen.
Okinawa customers will need to estimate shipping fees for 5,000 yen.

Large Product
For Tohoku (Aomori, Akita, Iwate, Yamagata, Miyagi, Fukushima), we will need an additional cost of 1,500 yen.
For Hokkaido, additional fees will be required for the shipping fee of $2000.
Okinawa customers will need to estimate shipping fees for 5,000 yen.

▲▲▲Products shipped by mail bin (Yu-Packet, etc.) do not incur additional shipping cost.