Feature
●Set of 3: Ignition Coil, Genuine Part Number: 22448-8J115, 22448-8J115 / 22448-8J11 , 22448-8J110, 22448-8J100, 22448-8J11C, New Quality, Factory 100% Strictly Inspected Before
●Yes, compatible replacement [compatible models] E51, APE50, APWE50, NE51, ME51, MNE51 engine models VQ25DE, VQ35DE where applicable
●Please check your original number or part number before purchasing. It may not fit even if the vehicle is in the compatible vehicle column. ※To verify compatibility, use the compatible part number to replace the year/make/model drop-down bar. Please read fitment list carefully in advance to avoid ordering inappropriate coils. We also accept compatibility confirmation or questions
●Product performance: fast response speed, stable performance, close to original effect. In the linear range of the sensor, the sensor has a high sensitivity, high signal to noise ratio, minimizing the introduction of plant from outside interference signals
●We are committed to providing a 100% product guarantee for all people and provide the best customer service! If you have any questions regarding this project, please email us. We will try our best to reply you within 24 hours
Description
Yes, replacement compatible, ignition coil for reference:
(·Nissan) (APE50/APWE50) (Engine type: VQ35DE) (E51/NE51) (Engine type: VQ35DE) (ME51/MNE51) (Engine type: VQ25DE) (Tiana) (J31/PJ31) (Engine model): VQ23DE VQ35DE (Engine model) Presage) ( PU31/PNU31) (Engine Model: VQ35DE)
Ignition Coil Specifications:
Number of Ignition Coil Bags: 3 PC End Sex: Male Terminals: 3 Terminal Type: Blade Vehicle System Electrical Pressure: 12 Volt Part Number: 22448-8J115 / 22448-8J11 / 22448-8J110 / 22448-8J100 / 22448-8J1C
Kacrik
When and why should I replace the ignition coil?
Ignition coil will fail due to deterioration, overuse, or just manufacturing defects.Heat from electrical terminals may cause cracking or melting in the material.Replace your ignition coil as soon as your car begins to show signs of misfire.If the engine check light is displayed or the vehicles manual should be replaced after a certain period of time. The symptoms of defective coil may vary depending on the vehicle that is problemed. When "CheckEngineLight" is turned on, it may cause misfire, backfire, burnt gasoline odor, or start-up issues.This will be shown as a CELL on the dashboard.If the engine misfires are extended and the catalytic converter may be destroyed and lead to engine explosion. When replacing the ignition coil, you should replace it at a time.Please note that if one of the coils is defective, the other coils may have a near future defects. The number of ignition coils in the car may vary depending on the engine, model, and year of the car.Do not assume all vehicles are the same.
Ignition Coil Working State:
|
|
|
|
|---|---|---|
Coil Damage Signal:When the engine suddenly fluctuates (after 1 km driving), there is a obvious lack of power. Without ignition coil the spark plug and cylinder will not work, and the fault light will light up, you need to replace the ignition coil immediately. |
Installation Details:Remove the negative terminal of the battery and find the ignition coil to replace. Remove each cable into the coil, push the ignition cable into the side of the coil, loosen the plug clamp inserted into the side of the coil. Use the wrench to loosen the bolts that hold the original coil. Remove the original coil from the engine compartment and compare the new coil to the old coil in the same direction, insert the bolt to the coil to the coil in place. Then in the order above. Insert the ignition cable, reconnect the battery, start the vehicle and test the new coil. |
Strict Quality Control:All of our ignition coils are subject to strict quality control throughout the manufacturing process as well as before shipment. A few quality control checks are performed at each stage of production, and all parts will last for years. |
