"Easy to assemble.

Just insert 3 parts (base, side board, and top panel) into the grooves and youre done! "

It consists of 3 parts (pedestal, sideplate, and top board).

(1) Insert the side plate into the base.

(2) Insert the top plate into the side plate and youre done.

Specifications: Top plate (transparent): styrol resin, side plate (transparent): vinyl chloride, base (black): styrol resin.

Due to the production process of the product is handmade, there may be slight differences between each product.Please acknowledge

Measurements shown are outside the side plate.

It does not include the pedestal and the top board.

The groove depth of the base is about 0.4 inches (1 cm), so the height of the inner dimensions is approximately 0.4 inches (1 cm).

Groove depth may vary slightly depending on the size. )

The thickness of the side plate is about 0.01 inch (0.35 mm) to approximately 0.02 inch (0.4 mm) (depending on size)

The dimensions of the width and depth are the inside dimensions.

Case Size: Side plate thickness:

4.7 to 9.5 inches (12 to 24 cm) Series: Approximately 0.01 inch (0

10.6 - 15.7 inches (27 - 40 cm) Series Approximately 0.02

Example: if the case is width 4.7 inches (12 cm) x depth 4.7 inches (12 cm) x height 7.1 inches

Actual inner dimensions are approximately 4.7 inches (11.9 cm) wide x 4.7 inches (11.9 cm) deep x 6.7 inches (11.9 cm)(There may be slight deviations. )

Since it is foldable, please understand that the size is approximately based on processing of the folded portion of the side plates.

Corners are processed to foldSide panels are made of PVC sheets.

The thickness of the side plate is 0.01 to 0.02 inches (0.35 to 0.4 mm), so please do not place too heavy items.

We do not calculate or check the weight capacity of this product.

When not in use, it can be folded and stored as shown in the picture. When folded, the thickness is about 1.2 inches (3 cm). When delivered, it will be folded as shown in the picture.