Power Mono Amplifier
Rated output: 300W x 1@4Ω, 500W x 1@2Ω, 500W x 1@1Ω
The T500-1bdCP is based on the legendary T500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. With the T500-1bdCP, you can now use an "under-the-seat" dedicated subwoofer amplifier to drive two 4-Ohm DVC subwoofers. This amp will provide enough bass to separate you from those envious car audio geeks.
The "Constant Power" configuration delivers up to 25% more power (Watts) across all impedance loads.
Click to enlarge.
Pass-thru connection for easy system-building.
Click to enlarge.
Small chassis designs with serious power.
Click to enlarge.
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifiers output power ratings are REAL POWER numbers, not inflated marketing ratings.
Class bd
Rockford Fosgate bd topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs. POWER bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. What does that mean? More power from your amplifier with less drain on your vehicles electrical and charging system.
Constant Power
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. This patent pending technology gives the amplifier the ability to instantaneously deliver its maximum output power to the speaker without regard to its varying impedance while still maintaining its high-efficiency and thermal performance.
Differential Inputs
Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
Dynamic Thermal Management
Heat is often inefficiently dissipated across a heatsink causing "hot spots". Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.
MEHSA3
MEHSA3 (Maximum Efficiency Heat Sink Application--gen. 3) reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
NOMAD
NOMAD (Non Multiplying Advanced Decision) is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Punch EQ2
In the early 70s, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars: a midbass hump between 100-275Hz, a steep roll-off of high frequencies from 2kHz up to 20kHz, and reduced bass response below 50Hz.
The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.
Rockford Fosgate Avatar
These Avatars are a personal signature from the Rockford Fosgate team member who designed and engineered this fanatic product. This statement illustrates Rockfords commitment to being Designed and Engineered in the U.S.A.
TO-247 MOSFETs
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.
Number of Channels: 1 Rated Power: 300W x 1 @ 4-Ohms RMS
500W x 1 @ 2-Ohms RMS
500W x 1 @ 1-Ohm RMS Total Power: 500 Watts Dynamic Power: 690 Watts Bridgeable: No Efficiency (average): 86.2% @ 4-Ohm
82.3% @ 2-Ohm
73.4% @ 1-Ohm Crossover Controls: Low-Pass (LP): 35-250Hz 24dB/octave Butterworth Tone Controls: Bass: 0dB to +18dB @ 45Hz
Infrasonic Filter: -3dB @ 28Hz 12dB/Octave Signal Input: Low level: 1 RCA pair Signal Output: Low level: 1 RCA pair Power Input Connector: Block Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal barrier strip Speaker Wire Gauge: 8 AWG to 18 AWG Heat Sink Type: Cast aluminum Cooling: Convection Remote Controls: Optional Remote Punch EQ (overrides built-in Punch EQ) Visual Indicators: Power
Thermal
Protect Circuit Topology Class: Class bd Frequency Response: 20Hz to 250kHz +/- 0.5dB Shipping Weight: 13.39 Lbs. (6.07 Kg.) Dimensions (HxWxL): 2.14 x 8.14 x 11.41 (in)
5.42 x 20.68 x 28.97 (cm)
The 2010 product line represents the companys core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.
Rockford Fosgate Power T500-1BDCP 500 watt mono amplifier Rockford Fosgate Power T1000-1BDCP 1000 watt mono amplifier Rockford Fosgate Power T1500-1BDCP 1500 watt mono amplifier