■Product Contents
# 110, 112.5, 115, 117.5, 120, 122.5
■Shape
Mikuni Compatible Round Large
■Size
8x9mm
■ Compatible Carburetor
For VM22 TM TMR MJN TDMR Carburetor
TZR50 (93-94): #80
KSR80: #72.5
The VM26 is available in our store for this jet (please choose the hex size for domestic products VM26).
■Mikuni Compatible Maru Large Main Jet List
Product ID/Dimension/Count.
2620: W3.1 x L3.5 inches (80 x 8 x 9 mm); #31.5 inches (82.5 cm), 33.5 inches (87.5 cm), 3.5 inches (90 cm), 36.2 inches (92.5 cm).
2489 W8 x L9mm m/#95, 97.5, 100, 102.5, 105, 107.5
2490 W8 x L9 mm m/#110, 112.5, 115, 117.5, 120, 122.5
2491 W8 x L9 mm m/#125, 127.5, 130, 132.5, 135, 137.5
[Precautions]
Our listed jet numbers will be based on the size conversion as below.
Example: #15-φ0.15mm, #150-φ1.5mm
Since Mikuni carburetors perform a manufacturers own flow rate conversion display, please check the following chart before placing your order. Our sizes are listed in the same way as Kehin counts.
Jet count and hole diameter by manufacturer (φ mm)
Keihin, Mikuni, Company
#15 0.15mm/0.32mm/0.15mm
#20 0.20mm/0.35mm/0.20mm
#25 0.25mm/0.39mm/0.25mm
#30 0.30mm/0.42mm/0.30mm
#35 0.35mm/0.46mm/0.35mm
#40 0.40mm/0.49mm/0.40mm
#50 0.50mm/0.55mm/0.50mm
#60 0.60mm/0.62mm/0.60mm
#70 0.70mm/0.68mm/0.70mm
#80 0.80mm/0.74mm/0.80mm
#90 0.90mm/0.79mm/0.90mm
#100 1.00mm/0.85mm/1.00mm
#125 1.25mm/0.98mm/1.25mm
#150 1.50mm/1.09mm/1.50mm
#175 1.75mm/1.20mm/1.75mm
#200 2.00mm/1.29mm/2.00mm
#250 2.50mm/1.43mm/2.50mm
The sizes listed above are the manufacturer values. Our Mikuni Jets are sold as a number display on the same way as Kehin.