A set of carriers and boxes that are indispensable for touring.
The box also comes with its own mounting base, bolts, nuts, stays, and rubber for our carriers.
There is a belt inside the box that can secure your luggage to reduce the chance of swing.
Point 1 | Reliable Strength
We conduct stress measurement from engine vibrations and drops that are also performed by vehicle manufacturers, and we have checked a high quality level of strength through multi-directional strength test.
Point 2|Scratch and rust resistant paint
It has a 2 layer finish (main carrier part) with an electrodeposition coating that is resistant to scratches and rust and is also used for bike frames.
Point 3|Compatible with various boxes
You will be able to choose the rear box when you purchase the GIVI box, K-MAX, SHAD, etc., which is indispensable for touring.
(Secure to carrier with corrugated plate included with universal box/base) Can also be mounted on a variety of top cases. (*1)
POINT4 | Includes convenient carrying hook
Includes 4 luggage compartments.
In addition, the side crossbars can be used to hold hooks and other objects to suppress resonance caused by engine vibration.
Point 5 | Helmet holder can be attached at the same time.
There are mounting holes on the left and right for helmet holders, so you can use the helmet holder separately.
Can be mounted on either left or right side.
Point 6 | Expandable cargo hook
Use in the substay section for additional loading points.
Also recommended for dress up. (Model Number: XEK911K87A1)
POINT7 | Tandem Grip Included
Also equipped with a handy grab bar.
Point 8 | Main Pipe Φ22
The main pipe of the carrier is made with a diameter of 0.9 inch (22 mm) that is the same as a standard handlebar.
It can also be used to secure other items such as a helmet holder with a Φ22 clamp.
POINT9 | Conforms to lighting safety standards
Safety standard for lighting sources (from the center of the tail light, 15° above the horizontal surface and 15° below the horizontal surface.
You can see it. This product is compatible with some excerpt.
It is designed to provide optimal styling when you install the carrier on your vehicle while ensuring rear visibility.
● Fitment / Year:
SV650 (22.1 ~) [VP55E-10005~]
·SV650 (16.8 and up) [VP55B-10000~]
SV650X (22.1 ~) [VP55E-10008~]
SV650X (19.1~) [VP55B-102248~]
Important Notes | Please Read
·When using the SV650 fenderless kit (part number: EL336VP5A1), a set of 4 separate colors (model number: EL332VP5A1). Please check the fenderless kit directions and precautions.
(*1) We do not guarantee that it will be compatible with all manufacturer/type of general purpose bases. Also, the carrier used in the picture for the universal base installation example will not be the same as this one.
Please do not exceed the load capacity.
·The color of the product may differ from the left and right of the photographic conditions, monitor, product lot, or set product.
When installing a helmet holder, please do not drive while holding objects on the helmet holder.