Feature
●【Multi-functional 4 in 1】Large LCD screen allows the soil pH tester to easily display various measurements and the green backlight allows you to read the parameters in dark places. Single needle sensor, not easy to damage Auto shutdown can save power when not in use for 5 minutes. Latest chip solves the inaccurate reading problem of older models
●PH Measurement Range: 3.5 - 9.0. Soil temperature measurements, temperature measurement range: -9 to 50 °C (16 to 122 °F) (accuracy: 1 °C / 1 °F) Working Temperature: +5°C to +40°C
●Continuous Usage Time: 12 hours (battery included may be short as the battery is for monitor); If you do not operate it for 5 minutes, the power will automatically shut off. Battery level warning function
●Product Parameters: Size: 12.4 x 4.7 x 2.6 inches (315 x 120 x 65 mm). Probe length is 195mm See photos for details on screen display and description of soil temperature, illumination, PH and humidity. If you have any question about the use of the product, please feel free to contact us
●Wide range of uses: Can be used indoors or outdoors. The lightweight design of the plant hygrometer can be used for gardens, farms, potted plants, succulents, etc. Tip: Direct measurement in water is strictly prohibited! Do not use on dry soil / super damp soil! Must be used in moderate damp soil!! This product is limited to soil. Not suitable for powder, pebbles, organic objects, particles/saw (juicy/orchids)
Description
4 in 1 soil testing equipment can test soil moisture, pH, temperature and environmental strength by using a 200mm long probe. It can easily display various reading with the LCD.
|
|
|
|
|
|---|---|---|---|
|
Product Specifications: Measurement for: Illumination, soil acidity, soil moisture, soil temperature Measurement range: Illumination (9 levels): LOW-, LOW, LOW+, NOR-, NOR+, HGH-, HGH+ PH Measurement Range: 3.5 - 9.0 (display resolution 0.5) Soil temperature measurement range: -9 °C to +50 °C (minimum display 1 °C, accuracy ± 1 °C) Operating Temperature: +5 °C to +40 °C - Operating Humidity: 5% - 95% RH No Condensation Storage conditions: -4°F to 122°F (-20°C to 50°C), ≤85% (humidity) |
Function Switch Introduction 1. PH/Ground Temperature Switch - Choose a function to measure acidity and soil temperature. 2. Switch ON--Press the switch ON to use it. 3. Measurement probe -- It can measure light, moisture, PH, and soil temperature. 4. Illumination Sensor: You can measure the intensity of the growing environment. |
5. LCD digital screen--easy to read data. 6. ℃/℉ OFF--When measuring the soil temperature, you can choose the temperature of Celsius/Fahrenheit. Press the switch off for more than 3 seconds to shut down this product. 7. Probe Cover: Before use, remove the protective cover and cover the probe when not in use to protect the measuring probe. |
How to use Insert 1.9 V battery 2. Press the switch on. 3. Choose PH/°C function 4. Insert the measuring probe into the soil and record data in 1 minute. 5. Wipe the probe after use and cover it. 6. Take out the battery when not in use 7. Battery not included. |
|
|
|
|
|
|---|---|---|---|
|
A soil acidity meter for gardening and crop growth. Multi-functional digital display can be used for measuring light, soil acidity, soil water and soil temperature. |
Equipped with a backlight that is easy to see even in dark conditions. Battery level warning function is included. The tip of the pole is 1.6 inches (4 cm) at the point of the bar. |
For a variety of situations: Test the soil conditions (moisture / sunshine / PH value) of house bonsai, fruits, flowers, vegetables, shrubs, etc. |
Product Size: 12.7 x 2.5 x 1.4 inches (322 x 63 Weight: Approx. 2.5 oz (70.5 g). It is best to measure the PH of soil in your home garden, etc., and then wet the soil before measuring it. Note: This product is a soil measuring instrument, but it can be used to measure light, soil acidity, soil water and soil temperature, but it cannot measure PH values of liquids such as alkaline water, acidic water, drinking water, etc. |
