Feature

●Daihatsu Car Rear Camber Plate Spacer with ABS
●Camber angle after installation: Rear approx. 5 degrees
●By attaching this product, you can increase the area of the tire ground during cornering and increase the tire grip and greatly improve the cornering performance
●Simply remove the bolts that hold the rear drum and create a gap from the back and insert the product. <BR>Can also be attached to processed axles
●Rear camber plate (approx. 2°) x 2, (approx. 3°) x 2


Description

Product description

Daihatsu Car Rear Camber Plate Spacer with ABS

Camber angle after installation.
Rear: Approx. 12°F (5°C).

By installing this product, you will increase the tire ground area during cornering
Increases tire grip and increases cornering performance.

Simply remove bolts that hold the rear drum and create a gap from the back and insert the product.
It can also be attached to the processed axles, so you can pursue your favorite camber angle.

Set Contents:
Rear Camber Plate (Approx. 2 degrees) x 2
Rear camber plate (approx. 3 degrees) x 2

Use one plate at a time of 2° + 3° per side.

Legal Disclaimer

Instruction manual not included. Please refer to Minkara or Youtube for concern.
This product is a competition piece. Please install at your own risk.
There may be scratches or stains during import and production. Exchanges and returns are not covered under guarantee.
Not compatible with non-ABS vehicles.
Depending on the car model, processing such as scraping may be required.
Please be sure to observe the prescribed torque during installation. We also recommend regular tightening
·We will disclaimer for damage or factory fees caused by installation of this product