Feature(may vary by option.)
●Product Name: Low Down Kit 1 Block Kit 1.0 inch (25 mm) + 3 Bump Set (200 Series 4WD), Compatible with 200 Series High Ace 4WD, Details: 1 Set for 1 car, Year, Model 04 - August to Current, 1,2,3,4, Description: This is a value kit that includes 3 low-ring blocks and bump stops. ■ [Kit Contents] Lowering Block Kit 25mm (U-Bolt Total Length Approx. 10.4 inches (263 mm) Bump Stop Set (Front Thin Bump, Rebound Stop, Rear Thin Bump) *Since this is a U-bolt that is compatible with 25 - 75 mm, please cut excess bolts before using. The car equipped with 3 type discharge headlamp and 4 type LED headlamp can be changed with an auto-leveler adjustment kit for a 1000 yen. Note: Please note that the increase in the price of the kit will not automatically reflect on the shopping basket. After order confirmation, the price will be corrected.
[No addition]
[With levelizer kit]
Description
200 Series HiAce 4WD Low Down Kit 1 [1 inch (25 mm) + 3 Piece Bump Set]
Compatible vehicles: 200 series high ace/regias ace.
Year: H16.8-Current
Model: 1, 2, 3, 4, 5, 6
Grade:All Car
Body: Narrow body (standard body)/Wide body
Movement: 4WD
Description:
Compatible with 200 Series HiAce 4WD narrow body (standard body)/wide body.
This is a great value kit that includes 25mm (1") lowering blocks and 3 bump stops.
This product includes an auto-leveler adjustment kit for cars with 3 and later discharge headlamps, and LED headlamps.
Kit Contents:
Strength Test Results Included ※
Specially designed for 200 series with steel plated finish.
U-bolts are 13mm thick just like the original.
U-bolts are compatible with 0.9 - 3.0 inches (25 - 75 mm), so please cut off excess bolts before using.
(Bump Stops 3-Piece Set)
Front Low Profile Bump Stop:
Thermoplastic urethane resin (TPU) pads, 0.6 inch (15 mm) thick.
Genuine thick bump stop will always bump to touch when low down.
Low-profile replacement improves arm range and reduces uncomfortable bump touch.
Improves your ride
Rebound Stop:
Thermoplastic urethane resin (TPU) pads, 2.4 inches (60 mm) thick.
Prevents anchor arm play when torsion bar is loosen.
It also limits the range of motion with the upper arms on the extension side, reducing the roll (left and right swinging of the body).
You can cut it to change the height and adjust it according to the amount of lowdown.
Rear Thin Bump Stop:
Uses thermoplastic urethane resin (TPU) padex; thickness is 1.6 inches (40 mm).
Genuine thick bump stop will always bump to touch when low down.
Thin replacement ensures rear axle clearance and reduces uncomfortable bump touch.
In addition, the rear is assumed to have a bump touch depending on the amount of lowdown and load status.
Improved hardness, reduces impact when the bump touch is used, and improves the riding comfort.
Note:
Jastro vehicles have lower tire houses depending on the floor, and may not be able to drive due to the amount of down, tire size, and loading.
Please make sure to check the actual vehicle condition before making your decision.
Note: Please be sure to read.
We do not accept returns or exchanges for the convenience of the customer.
·Please be sure to check the order contents and contents.
·We cannot accept complaints except for initial defects or wrong shipping within 3 days after the product arrives.
·Returns and exchanges cannot be accepted after installation.
·We will not accept returns or exchanges due to the customers preferences.