Feature(may vary by option.)
●Double Motor, High Efficiency: Welding can only be adjusted for 2 to 5 seconds. The tightening force can be adjusted from 60 to 2800 N. Equipped with a hollow cup motor and a coreless rotor. The running capacity is very stable and energy efficient
●【Automatic Welding Strapping】This strapping machine does not require additional fasteners to secure it. Simply roll the belt up by hand, push the end into the joint of the machine, and the machine will automatically tighten. Rub the belt on the heating melt part automatically, and welding is done automatically. Automatic operation and packaging effect is solid
●(Significantly Improved Work Efficiency) This electric binding machine can be operated automatically with one hand to eliminate the hassle of traditional manual binding methods. No need to connect wires or strap belts anytime, anywhere
●(Can charge the machine and battery at the same time) With a 3,000 mAh battery, the charging time is only 1.5 hours. You can remove the battery and put it in the battery box to charge it. For PP belt, plastic strip or fragile package, 80-200 belts can be bundled continuously
●【Wide Range of Use】Perfect for food, electronics, toys, cosmetics, pharmaceuticals, daily necessities, books, electronics, textile, logistics, etc
[01]
[2]
[3]
Description
Features:
Made of alloy steel and engineering plastic, durable and sturdy.
Anti-slip handle, wear-resistant, vibration, high temperature
Front end of strap belt with tie point to prevent package from falling apart or falling off.
Premium motor with non-core rotor, stable operation, efficient and energy saving.
LED indicator light, blue means working properly, red means low battery, purple means job is complete.
Adjustable tightening and hot melt time.
Carry strap strap for easy loosening of straps.
High quality alloy steel blade, cut the strap quickly and cleanly.
Specifications:
Applicable Strap Width: 0.6 inch (16 mm)
Apply Strap Thickness: 0.5-1.2mm / 0.02-0.5inch
Power: 0.2 KW
Sealing strap form: friction and welding
Welding Time: 2-5S
Maximum Tensile Force: 2800N
Battery: Lithium battery 3.0A / h 12 VCD.
Charger: 110V AC-60Hz, DC 12.6V = 4.0A
Charging time: 90 minutes of charging can strap 100-200 loops.
Battery life: 2,000 recharge cycles
Weight: 3kg / 6.7lb
Machine Size: 13.4 x 5.1 x 4.6 inches (340 x 130 x 118 mm)
Packing Belt: PP or PET
Instructions:
1. Put the strap-up head down, lift the handle with your right hand, insert the strap and release the handle.
2. Press the pull-down button, and press the switch button when the strap reaches the tension
3. After tightening, press the Fusion button, your hands will be immediately released, the straps are welded and the excess strap is cut.
4. Lift the loose strap of the corresponding handle and pull the baler from the strap to the right.
Notice:
Always wear gloves during operation and follow instructions