Feature

●Specifications: As a DC 12V diaphragm pump for reliable and stable work, work voltage: DC 12V (recommended 9V 1A, 12V 1A); Working current: 0.5-0.7A; Working flow: approx. 1.5-2L/min; Maximum suction range: 6.6 ft (2 m); Maximum hydraulic head: approx. 2,500h; Water temperature: below 80°C
●Scope of application: The pump can be used for automatic extraction water servers, aquariums and watering equipment. This small pump can be used for automatic extraction water servers, aquariums and watering equipment
●Features: Comes with a fixed silica gel cover for convenient installation. Both the inlet/outlet holes are large, allowing water pipes to be exconnected and low installation requirements. When operating normally, the power is small (12V 0.3A) and there was no noise
●Excellent Performance: There is a silicone cover on the back of the pump. Do not cover motor cooling holes in order to affect heat dissipation and service life
●[Our company] If you have any inconvenience after your purchase, please feel free to contact us. We provide careful follow-ups, FAQs, and complete support. Please contact our shop and our staff will respond quickly


Description

Diaphragm PumpDiaphragm Pump

Description

Directly connect the DC positive and negative pole to the pump motor wiring, the pump motor wiring pins do not distinguish positive or negative, and the power pump can work normally.

You can operate the pump powered on and off with a relay to achieve automatic control.

Features:

1. Take the fixed silica gel cover, convenient to install.2. The inlet/outlet holes are both large, allowing water pipes to be outconnected, and the installation location is low.3. When operating normally, the power is small (12V 0.3A) and there was no noise.4. The water flow pressure is large, so it will not be filled with your fingers.5. The design is simple and beautiful.

Note:

If the voltage is 6V, the power is 6W/H, so 4 alkaline batteries are not enough.When operating, please be careful not to block the radiation holes of the motor in order to avoid affecting heat dissipation and service life.Just move it back a little

Specifications

Working Voltage: DC 6-12V(9V 1A, 12V 1A)
Working current: 0.5-0.7A
Discharge Volume: 1.5-2L/min
Suction distance: 2 meters
Drain Diameter: Inner diameter 0.2 inch (6 mm), outer diameter 0
Maximum liquid temperature: 176°F (80°C)
Working time: 2500 hours
Pump Size: 3.5 inches (90 mm) x 1.6 inches (40 mm) x 1.4