Feature(may vary by option.)
●[Uses] For drainage of sewage floor water in general construction work, manholes, pits, and residual water drainage in water tanks, for general residual water drainage
●[Features] If there is a water level of 0.2 inch (5 mm) from the bottom of the pump, it can also be drained up to 0.04 inch (1 mm). The spout direction can be changed upwards and sideways, preventing the hose from bending when pulling horizontally. The hose has a cutout shape for mounting holes, so you can remove and remove it by simply loosening the nut. The bottom plate is made with synthetic rubber that does not damage the floor surface, making it suitable for use in FRP tanks, etc
●Spout Diameter: 2.0 inches (50 mm)
●Power: 0.4 kW / Phase Voltage: Single-phase 100 V
●Total Lifting Height: Max 39.2 ft (12 m)
●Weight: 22.8 lbs (10.8 kg)
●Cab Tire Cable: 16.4 ft (5 m)
[10m]
[20m]
Description
[Use]
For draining sewage floor water in general construction work.
For drainage of residual water in the manhole, pit, and tank.
For general residual water drainage.
Features:
Can be pumped if there is a 0.2 inch (5 mm) water level from the bottom of the pump, and it can also be drained up to 0.04 inch (1 mm) water level.
The spout direction can be changed upwards and sideways, preventing the hose from bending when pulling horizontally.
The hose has a cutout shape for mounting holes, so you can remove and remove it by simply loosening the nut.
The bottom plate is made with synthetic rubber that does not damage the floor surface, making it suitable for use in FRP tanks, etc.