[clear & silver]
[melo smoke & red]
[melo smoke & blue]
Yamashiro EXTRA Shield (Extra Shield)
CNS-1 shield compatible with SHOEI GT-Air, GT-Air II, and NEOTEC series.
Mirror shield made in Japan with a focus on ease of vision, reducing distortion and internal reflection.
The base of the shield is made of genuine manufacturer for peace of mind. Available in 3 colors.
Compatible Helmets: Can be attached to Shoei GT-Air, GT-Air II, and NEOTEC series.
·The shield body uses genuine products from a reliable manufacturer.
Special mirror coating minimizes vision distortion and reduces eye fatigue.
Uses a water-repellent coating. Mirror coated smooth surface repels moisture
Mirror coating is made in Japan for peace of mind. The craftsmen have undergone a careful coating.
Not only does it dazzle but it also blocks 99% of UV rays, so it is gentle on your eyes.
The shield is compatible with all sizes.
Coating Color Features:
Silver-based: It is characterized by preventing eye fatigue even when used for a long time. Natural tone for uniform light
Red type: Highly anti-glare and recommended for driving in sunny weather. Soothing blue vision with red cut
Blue type: cut blue light. Hue with enhanced contrast
Care of Mirror Shield (Precautions for use):
If it gets dirty, remove dust or other contaminants with running water, and then wash with a diluted neutral detergent. After rinsing off detergent, wipe with a soft cloth.
Do not use organic solvents such as thinners or volatile solvents. Please check the ingredients used for commercially available cleaners.
Leaving dirt on the surface for a long period of time may damage the coating.
When storing, avoid high temperatures and check the condition of the shield before driving.
Mirror shield reduces transmittance and makes it look dark. Do not use it when riding at night. Use clear shields that are not mirror coated for night riding.
Main cause of vapor peeling
Uses liquid with excellent penetration power.
Note: Do not use any liquid with excellent penetration power. Mirror shield is coated and covered with micro powder coating
If you use a solution with excellent penetrating power such as parts cleaners, insect repellents, anti-fog chemicals, and acidic liquids, the liquid will penetrate into the powder and cause vapor deposition to peel.
In addition, there is a possibility of vapor deposition peeling similar to rubbing the shield with fabric, gloves, etc. that have been adhered to these liquids.
Please do not use silicone grease other than the surface of the product.
Use other than soft cloth.
Note: Please use a soft cloth when wiping work. If you wipe it with a dirty cloth such as a hard cloth, a sand spot, etc., it may damage the shield.
Please use a soft cloth such as a microfiber cloth when wiping the mirror shield.
Effects of acid rain
Note: Please be careful when using in rainy weather. Mirror shields are weak to acidic properties, and may cause vapor deposition to come off due to acid rain.
Do not rub hard or wipe with a hard cloth when using in rainy weather.
After use, rinse the rain quickly under running water and gently wipe with a soft cloth. (Please avoid using strong washing under running water. )
The shield that uses a mirror coating is genuine product from the manufacturer, depending on the type of shield, there may be a mix of American-made or Japanese shields