★Product Description★
➤ Black leather (our full original leather) with a red line for further evolution.
➤ Sturdy construction for design, strength and ease of use.
The height of the bed can be adjusted to 5 levels.
(From the floor, 14.9 inches (37.5 cm), 16.1 inches (41 cm), 17.7 inches (45 cm), 19.1 inches (
⇒ Folded the second row sheet forward to almost flat (2nd level from the bottom of the frame)
The board is made of 0.9 inch (24 mm).
⇒ The size of the bed is 4 sheets of height 70.9 x width 59.1 inches (1800 x 1500 mm).
It can be installed with dark prime and dark prime 2.
The leather used is Lynx Custom Made Original Leather.
Made in Japan for peace of mind.
■Flat4 Features: ■
Traditional products pull the leather to create a rounded edge on the bed.
So when you line up your bed, you can dent the gap between your bed and the bed.
The flat4 sew the leather along the board and then tensioned to ensure no rounded edges on your bed.
So when you line up your bed, it will lay flat without dents at the edge of your bed and bed.
■Mat part■
★Black soft leather and red leather. It feels good on the skin.
★If it becomes damaged during use, you can only purchase the damaged part.
★The back is made of quality non-woven fabric.
★Cushion is 45mm Very comfortable to sleep on.
No back pain when adults sleep
★ As imported, all items are miscellaneous (wrinkles, rattling, and paint peeling during stretching.
The material is low quality, and it is not suitable for tuckers when lining).
★The rear belt equipped vehicle has been designed to allow the seat belt to be easily inserted and removed
★Bed mat can be stored when not in use.
★ Load Capacity: 440.5 lbs (200 kg).
★ The leather used in our bed kits does not contain formaldehyde, which is said to be one of the causes of sick house syndrome, so you can rest assured that it is safe to use.
■Frame part■
★ Changes from square frame to round frame.
★Super smooth up and down
★ Each piece is handmade by artisans and carefully finished.
★ Sturdy construction with very little rattle in the frame like cheap imported products.
■About Installation■
★ Uses a bolt hole with a tie down hook (4 locations) located in the cargo area of the HiAce/Regias Ace 200 series. So you can fix it without drilling holes in the floor.
★You can rest assured if you are not completely confident about the installation. Instruction manual is included, so if you have a 0.5 inch (12 mm) socket wrench, it is 15 minutes? Can be installed in 30 minutes.
★ There are small holes on the side of the frame, but it is a necessary hole for painting No problem with use.
★The bolt is even better!
Traditional bolts may interfere with tie-down hooks when mounting the frame to the floor, but due to improvements, they do not interfere.
Our bed kits are different in shape due to different standard and DX wide, so if you choose different types of beds, you will not be able to install.
This is a "standard" bed kit. We cannot accept returns after opening, so please make sure to check before ordering.
Our beds are made and sold to ensure that they are safe and stay-free.
Using a bed while driving is very dangerous.
Never use a bed while driving as this may lead to a major accident.
We are not responsible for any accidents occur while driving