Feature(may vary by option.)
●1: Hydraulic cylinder is durable and will not crack or leak oil after years of use.
●2:Easy to operate, can be used horizontally and vertically
●3: 2 or 3 jaws can be replaced
●4: Alloy steel claws
●5: Thick sesame handle, comfortable to grip
[YL-30T]
Description
Dimensions:
- YL-5T: Total Length: 14.2 inches (360 mm), Handle Length: 15.4 inches (390 mm), Claw Length: 9.4 inches (240 mm)
- YL-10T: Total Length: 14.8 inches (375 mm), Handle Length: 15.4 inches (390 mm), Claw Length: 11.8 inches (300 mm)
- YL-15T: Total Length: 14.8 inches (375 mm), Handle Length: 15.4 inches (390 mm), Claw Length: 11.8 inches (300 mm)
- YL-20T: Total Length: 15.7 inches (400 mm), Handle Length: 15.4 inches (390 mm), Claw Length: 11.8 inches (300 mm)
- YL-30T: Total Length: 18.1 inches (460 mm), Handle Length: 15.4 inches (390 mm), Claw Length: 15.7 inches (400 mm)
- YL-50T: Total Length: 18.5 inches (470 mm), Handle Length: 15.4 inches (390 mm), Claw Length: 19.7 inches (500 mm)
CGOLDENWALL Gear Puller 5T, 10T, 15T, 20T, 30T, 50T
==================================
This hydraulic gear puller is useful in manufacturing and maintenance factories for removing and removing hub bearings on motorcycles, luggage, and more.
==================================
- Effectively prevents oil leaks and cracks: The pump body is forged in one piece, no welding seams, smooth and will not leak or crack over long time use.
- Switchable between 2 and 3 jaws: You can use 2 or 3 jaws depending on your needs.
- Horizontal and vertical use: Can be used both horizontally and horizontally.
- Storage case, convenient to clean up after use.
|
|
|
|
|
|---|---|---|---|
Removable pinIt is wear-resistant and durable.You can also remove the pins for cleaning. |
Prevents oil leaks and cracks.The pump body is forged in one piece, no welding seams, and will not leak or crack over time |
2.0 inch (5 cm) piston rodMove the handle up and down and the piston rod slowly expands with hydraulic pressure. |
Movable handle.Comes with a rubber cover to prevent your hands from getting tired even after long periods of use. |
Easy to use
1. Tighten the pressure knob clockwise before use.
2. Adjust the gear puller sleeve until the fingernail grabs objects.
3. Insert the handle into the hole and move it up and down, the piston rod will move smoothly, and the claws will revert and pull objects pulled out.
4. If the item is pulled out, stop the operation and turn the pressure bearing knob counterclockwise.Adjust the travel distance and repeat between 1 and 3.
