Feature

●Product Specifications: Voltage: 100 V; Capacity: 1000 W; Current value: 10 A; Cord length: Approx. 6.6 ft (2 m) (slight variations may occur). )
●Product Information: Connection material: Box part (ABS), Wire material: VCTF (6.6 ft (2 m) + tracking prevention plug
●Temperature Sensation: Automatic temperature adjustment function: None. Temperature adjustment range: 88°F to 244°F (30°C to 120°C); Empty firing surface temperature: 144°F (663°C)
●Precautions for Use: Use with a metal bucket as a boiling water. Please be careful when cooking empty (use in places without water). If the cord is pulled tightly, there is a risk of disconnection, and the product may cause a bad contact, so please hold the box when you lift it


Description

Recessed Heater
This is a new brand from Taiei Denko Industry, designed to be the perfect specifications for customers.
Perfect for winter work sites. This is a Nagecom brand product.

Just put it in the container and you can boil hot water with electric!
It can also be used as a disaster prevention item in case of emergency.

Usage examples
Use at work sites
A car wash in cold weather.
Cleaning up after gardening and farming.
For outdoor gatherings and meals.
For outdoor use.
For interior and cloth pasting.

Industry Type:
Carpentry, Plaster, Paint, Waterproof, Gardening, Agriculture, House Cleaning.

Precautions for Use:
This heater is designed for water. Do not use on non-water liquids.
When electricity is charged (empty firing) in the air, it becomes high temperature and may cause fire accidents.
Please do not put water into the mold part (rubber part) or electrical box.
Make sure to remove the ground from the ground terminal.

Target water temperature and rise time

For 500W
Water volume (liter) x rise temperature (intended water temperature - water temperature used)
____________________________________ × 1.3 = Hours (h)
430
For 800W
Water volume (liter) x rise temperature (intended water temperature - water temperature used)
____________________________________ × 1.3 = Hours (h)
688
For 1KW
Water volume (liter) x rise temperature (intended water temperature - water temperature used)
____________________________________ × 1.3 = Hours (h)
860

This formulation is an estimate when the amount of water is less than 7.8 gallons (30 L) of water. If the amount of water exceeds 30 liters, this is not the equation.
The measurements are for reference only, and may vary depending on the ambient temperature and environment.