The MSP3A renewed version of the versatile reference monitor MSP3. The "twisted flare port" allows you to play clearer and lower frequencies from a more simple and beautiful design.
The MSP3A has a built-in 22W power amplifier, and is equipped with an input terminal and operator to suit a variety of uses.
Not only can it be used for small private studios and post production, but also for electronic instrument monitor and surround systems.
|
|
|
---|---|---|
Lightweight housing with built-in 22W power amplifier, pursuing high quality reference sound.The MSP3A uses a 2-way bass reflex system with a 3.9-inch (10 cm) woofer and 0.9-inch (2.2 cm) tweeter, and a built-in 22W power amplifier optimized for speaker characteristics.In addition, this cabinet has a similar size to the previous model "MSP3", and it has been significantly lighter (10.7 - 7.5 lbs (4.4 - 3.6 kg); more portable, and can easily handle changes in the installation location.In terms of sound quality, it faithfully inherits the high quality reference sound of the "MSP Series" while being compact, it can be used in small private studios and post production, as well as for electronic instrument monitors and surround systems. |
Adopts a unique "twisted flare port" for clear and faithful low-frequency playbackWe have newly adopted a proprietary Twist Flare Port technology that greatly suppresses noise generated on both ends of the port.It changes the way it spreads toward the exit of the port and adds a "twist" to reduce airflow turbulence on both ends of ports that cause noise, and provides clear and faithful low-frequency playback.Reduce the turbidity of the sound you are concerned about and the noise produced on both ends of the ports, and experience the low-frequency playback sound that is important to you as a reference speaker. |
Operator suitable for a variety of uses.Each LINE1 (RCA terminal), LINE2 (XLR/TRS phone terminal), has independent volume and high/low tone control features, so you can adjust the sound quality according to your monitor environment such as the location of the installation and room sounds. |
Use the free angle clamp "BAS-10" to secure it to your desktop and use it.
You can attach it to the wall using the "BWS20-190" hanging hardware (sold separately).For example, it can also be used for audio output of ICT devices such as classrooms.
You can install it on the ceiling by using the "BWS20-190" ceiling hanging hardware sold separately.For example cafes and other commercial space applications.
You can use the "BMS-10A" microphone stand adapter (sold separately). Microphone stand thread pitch is 5/8" screw (can be changed to 3/8" depending on the included adapter).
Format | 2-Way Bass Reflex Powered Speaker (Twist Flare Port) |
Playback frequency band (-10dB) | 67Hz - 22kHz |
Components | LF/4" Cone, HF/0.8" Dome |
Crossover frequency | 4kHz |
Rated Output | 22W (Dynamic). |
Maximum output sound pressure level (3.3 ft (1 m) | 99dB SPL |
Input Sensitivity | LINE 1: -10dBu/10kΩ(RCA Pin), LINE 2: +4.0dBu/10kΩ(XLR/TRS Phone) |
Max input level | LINE 1: +10dBu(RCA Pin), LINE 2: +24dBu(XLR/TRS Phone) |
Input and Output Connectors | LINE 1: RCA Pin, LINE 2: Combo Jack (XLR/TRS Phone) |
Indicator | Power ON (Green LED) |
Power Supply Voltage | 100V, 50/60Hz |
Power Consumption | 30W (1 unit) |
Other | Level Control: (LINE1, LINE2), Tone Control: (LOW: -3.0dB - +3.0dB @ 100Hz, HIGH: -3.0dB - +3.0dB @ 10kHz), Hanging Point : M5(Depth 15mm) x2 |
Appearance Dimensions (per unit) | 5.7 inches (144 mm) (W)*9.3 inches (236 mm) (H)*6.5 inches (166 mm) |
Weight (per unit) | 7.5 lbs (3.6 |
Purchase includes | Power cord, instruction manual (English language not guaranteed). |