The Raspberry Pi 5 is equipped with a 64-bit 4-core Arm Cortex-A76 processor with a 2.4GHz clock frequency.2-3 times higher CPU performance than Raspberry Pi 4.It also greatly improves the graphics performance of the 800 MHz Video Core VI GPU and supports bi-directional 4Kp60 display output via HDMI.In addition, the redesigned Raspberry Pi image signal processor provides advanced camera support and provides users with a smooth desktop experience and expanding the possibilities for new applications for the industry.
For the first time in the Raspberry Pi 5, the new Raspberry Pi chip RP1 "southbridge" is introduced to the flagship product and provides most I/O functions for the Raspberry Pi 5.The overall USB bandwidth is increased by more than 1 times, allowing for faster transfer to external UAS drives and other high-speed external devices.The original model dedicated dual channel 1 Gbps MIPI camera and display interface replaces one pair of 4 channel 1.5 Gbps MIPI transceivers, increasing the total bandwidth by twice and supporting any combination of two cameras or displays.The peak performance of SD cards is twice as fast as supporting SDR104 high speed mode.This platform first reveals a single PCI Express 2.0 interface to support high-bandwidth external devices.
|
|
|
---|---|---|
RP1The Raspberry Pi 5 is built using RP1 I/O controllers that contain silicone designed in the Raspberry Pi. USB 3 has more total bandwidth for faster transfer speeds. The camera and DSI display connectors are compatible and can be used one of the different one at a time or two of the same. |
Broadcom BCM2712--Smoother infinitely at least twice as fastThe Raspberry Pi 5 is equipped with Broadcom BCM2712 Quad-Core Arm Cortex A76 Processor @2.4GHz, which is three times faster than previous generations.Equipped with an 8GB RAM variant for the fastest and smoothest Raspberry Pi experience ever made. |
DA9091 Power Chip8 independent switching mode power supply integrated to produce various voltage required for the substrate.This also includes a 4-phase core power supply that can provide 20A current to Cortex-A76 core and other BCM2712 digital logic. |
This added feature to the Raspberry Pi allows you to connect an M.2 SSD to the Raspberry Pi for fast data transfer and super fast boot.
Use the power button to activate and shut down the development board.
You can use HDMI to achieve dual display output of 4Kp60.
Raspberry Pi 5 includes RTC (Real-Time Clock) module.This is supplied by the battery via the J5(BAT) connector on the right board of the USB-C power connector.
You can set the alarm and switch the board to a very low power consumption state, (about 3mA).When alarm time comes, the board will power on again.This is very useful for routine tasks (e.g. delayed images).
The Raspberry Pi 5 has a dedicated debugging UART connector.Baud rate may reach 921,600 bps, can be set using EEPROM parameter.This UART is always active and active, providing initial startup and direct access to firmware information and access to Linux console.