Feature(may vary by option.)
●Compatible with a variety of beverage cases from thin cans to paper packs. The drink holder part is compatible with containers up to approximately 2.9 inches (74 mm) in diameter and 16.9 fl oz (500 ml) plastic bottles, 16.9 fl oz (500 ml) paper packs, and can also be used as a storage for small items such as bottle gums
●A position that does not interfere with the cigarette lighter socket or USB port. It has sufficient clearance for the original cigarette lighter socket and USB port, so it does not get in the way when using a socket or USB compatible product
●Designed specifically for cars that do not interfere with the seats. Even with this product installed, it allows you to slide back and forth without interfering with both driver and passenger seats. If you have drinks or accessories in the drink holder, it may interfere with the seat
●The trash can can is easy to dispose of waste and has a good capacity. The trash can can can be removed from the side of the product, so it is easy to dispose of the trash after attaching the product to the vehicle. In addition, the capacity is approximately 0.7 gal (2.8 L) and is the perfect capacity for throwing away small garbage
●1 screwdriver, about 5 minutes to complete the assembly + just place it on a perfect fit. This product is assembled. After screwing in 8 places, simply attach the top and trash can, and attach the cushion, and the assembly will be done in about 5 minutes
[Daihatsu Hijet Atrai etc.]
[Modern]
Description
Premium Model Console Box for Atray/High Jet Cargo
Atray/Hijet Cargo Console Box
This multi-functional console box is perfect for the center foot of the Attry/High Jet Cargo with 2 drink holders that can hold 500ml paper packs from a thin can and is easily disposable.
High-textured carbon pattern design.
With matte black base, the top plate has a high texture carbon tone design.
Compatible with a variety of beverage cases from thin cans to paper packs.
The drink holder part can be used for containers up to approximately 2.9 inches (74 mm) in diameter or in length of 16.9 fl oz (74 mm), and it can also be used as a storage bag for small items such as 16.9 fl oz (500 ml) plastic bottles, 16.9 fl oz (500 ml) paper packs, and other items.
Drink holder with different depths
Different depths on left and right drink holders allow for easy access to small containers by placing them in shallow drink holders. So you can place a short bottle gum on one side and place a drink on the other. While taller plastic bottles may cause unstable when placed in a shallow drink holder.
Position that does not interfere with cigarette lighter socket or USB port.
It has sufficient clearance for original cigarette lighter sockets and USB ports and will not get in the way when using sockets or USB compatible products.
Designed specifically for vehicles that do not interfere with the seat.
Even with this product installed, it can slide back and forth without interfering with both driver and passenger seats.
If you have drinks or accessories in the drink holder, it may interfere with the seat.
The trash can is easy to dispose and has a good capacity.
Trash can be removed from the side of the product, so it is easy to dispose after the product is attached to the vehicle.
In addition, the capacity is approximately 0.7 gal (2.8 L) and is the perfect capacity for throwing away small garbage.
1 screwdriver, about 5 minutes to complete the assembly + just place it on a perfect fit.
This product is self-assembled. After screwing in 8 places, simply attach the top and trash can, and attach the cushion, and the assembly will be done in about 5 minutes.
Once assembled, simply place it on the center of the front seat and place it without wobbling it. You can also use the cushion on the front of the product without damaging your interior.
Before you buy
[Note]
Please do not leave your smartphone or other electronic devices in a state. High temperature may damage your smartphone or other electronic devices.
Do not place items (gas lighter, aerosol products) that may deform, deform or burst due to heat.
·Depending on the shape of the drink container, it may not be stable when riding on a bad road. Please check the stability before using.
Do not place drinks that are curved, especially like cola plastic bottle.
When riding with a 16.9 fl oz (500 ml) paper pack, please close the mouth of the pack as the contents may spill easily.
Please remove this product when opening the car engine room and fuse box.
When you put a drink in this product, sliding the seat (driver and passenger seat) may interfere with the drink.
This product is assembled. Please see "Assembly and Installation Instructions" in the package. Also, a Phillips screwdriver is required for assembly.
Recommended Car Models:
[Compatible models] As of November 2023 (R5) (vehicles have not been investigated)
·This product is only for the following vehicles:
Daihatsu Atray, High Jet Cargo (S700V, S710V, S700W, S710W, R3.12 ~)
Toyota Pixis Van (S700M/S710M, R3.12~)
Subaru Sunburban, Dias (S700B/S710B, R4.1~)
From the Manufacturer
Premium Model Console Box for Atray/High Jet Cargo
2 drink holders for 500ml paper pack beverages from a thin can and a centre of the front atry/high jet cargo with a trash can located in the easily disposal position
This multi-functional console box is perfect for your feet.
|
|
|
|
|---|---|---|
High-textured carbon pattern design.With matte black base, the top plate has a high texture carbon tone design. |
Compatible with a variety of beverage cases from thin cans to paper packs.The drink holder part can be used for containers up to approximately 2.9 inches (74 mm) in diameter or in length of 16.9 fl oz (74 mm), and it can also be used as a storage bag for small items such as 16.9 fl oz (500 ml) plastic bottles, 16.9 fl oz (500 ml) paper packs, and other items. Different depths on left and right drink holders allow for easy access to small containers by placing them in shallow drink holders. So you can place a short bottle gum on one side and place a drink on the other. While taller plastic bottles may cause unstable when placed in a shallow drink holder. |
The trash can is easy to dispose and has a good capacity.Trash can be removed from the side of the product, so it is easy to dispose after the product is attached to the vehicle. In addition, the capacity is approximately 0.7 gal (2.8 L) and is the perfect capacity for throwing away small garbage. |
|
|
|
|
|---|---|---|
Designed specifically for vehicles that do not interfere with the seat.Even with this product installed, it can slide back and forth without interfering with both driver and passenger seats. If your drink or accessories are stored in the drink holder, it may interfere with the seat. |
1 screwdriver, about 5 minutes to complete the assembly + just place it on a perfect fit.This product is self-assembled.After screwing in 8 places, simply attach the top and trash can, and attach the cushion, and the assembly will be done in about 5 minutes. Once assembled, simply place it on the center of the front seat and place it without wobbling it.You can also use the cushion on the front of the product without damaging your interior. |
Just place it on and it fits perfectly.Simply assemble and place it in the center of the front seat and place it without any wobbling The front is cushioned to prevent damage to the vehicle. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| Console Box | key cover | Assist Grip Mount Smartphone Holder | Assist Grip Mount Smartphone Holder | Door Guard | |
| Customer Reviews |
536
|
— |
18
|
15
|
632
|
| Price | ¥6,280 | ¥1,167 | ¥2,800 | ¥2,618 | ¥1,433 |
| Item No. | NZ854 | DZ603 | SA37 | SA38 | DZ577 |
| Description | Multifunctional Console Box with Drink Holder and Trash Can | Lightweight & Thin Shell Type Key Cover Carbon Tone | Smartphone holder that attaches to the assist grip. | Smartphone holder that attaches to the assist grip. | Rugged design door guard |