Feature

●Remove the syringe, fill with air, connect to the hose, pump air into the caviar maker to release any remaining liquid inside
●Removes hose and syringes from caviar maker
●It will continue to flow under running water until the caviar maker box is nearly filled with water
●Use your finger to seal the hose connector and shake the caviar box horizontally with the pipette facing down


Description

Caviar Maker Set - Caviar Box - Caviar Spoons - 2 Handcrafted Caviar Spoons for Molecular Cooking
Specifications
Caviar Box Dimensions: 5.55" x 3.94" / 14.103 cm x 9.996 cm
Small Hole Diameter: 0.35mm
Caviar Spoon Length: 6.64 inch / 16.862 cm
Tube Length: 8.51 inch / 21.622 cm
Weight: 8.7oz / 246g
Material: Acrylic
Multiple Holes: 100
Suitable for: molecular cooking
Removable or Not: Removable
How to use caviar maker kit?
1- Insert flexible tube into the fitting of the caviar manufacturer.
2-Add the desired caviar mixture to the caviar maker tray. The tray requires a minimum of 75ml to prevent the vacuum from being destroyed during suction.
3-Install the top of the caviar maker on the tray that includes the caviar mix. Now the 96 well tip will dip into the caviar mixture.
4-Syringe Plunger back to 5cc Creates air space and provides additional push at the end of the dispensing cycle.
5-Attach tube to syringe.
Slow and steady suction of the 6-syringe plunger to the 20ml mark on the syringe barrel.
7- Carefully lift the caviar maker from the tray and place it about 3 inches on top of the calcium bath. Slowly press down the syringe plunger from 20ml to 0ml
After 8-1 minute, remove the caviar spheres from the calcium tub, rinse them off with a clean water bath and get them out immediately.
Package Includes:
1 x caviar box
1 x caviar spoon