Specifications
Product Number: MIG130
Power Supply Voltage: Single-phase AC 200V
Frequency: 50/60Hz
Rated Input: 3.6 KVA
Main Fuse: 13A
Output Current Range: 50 - 120 A
MIN/1 (50A) MIN/2 (80A) MAX/1 (100A) MAX/2 (120A)
Welding Plate Thickness: Approx. 0.04 - 0.2 inches (1 - 6
Output Voltage: 37V
Compatible wire: 0.02, 0.03, 0.04 inches (0.6, 0.8, 0.9 mm)
Wire feed speed (approx.): 0.6 - 1.4 inches (14.5 - 35 mm) (dial adjustable).
Wire reel diameter: up to 3.9 inches (100 mm)
Rated Usage Rate: 120A/10%, 60A/35%
Protection degree: IP21
Insulation Class H
Product Dimensions: Approx. 14.2 x 6.9 x 11.8 inches (360 x 175 x 300 mm)
Product Weight: Approx. 39.8 lbs (19 kg).
Body Color: Black
PACKAGES
★Welding Machine Body (Torch (Approx. 9.8 ft (2.7 m), Ground Cable (Approx. 9.8 ft (3 m), Power Wire (Approx. 6.5 ft (2.6 M))
★Correct Chip Fuse
★Wire Mount Parts
★ Flux Steel Wire (0.8mm/0.45kg)
★Welding surface
★Brush
★Instruction Manual (English)
Torch and ground wires are usually 4.9 ft (1.5 m), but they often feel shorter in actual use, so we have custom made them long for a custom-made item.
This is a semi-automatic welding machine that is easy to use even for beginners.
This MIG130 semi-automatic welding machine is for use with no gas.
This is a gas-free welding machine that can be used in a variety of locations, both indoor and outdoor, and is highly recommended for those who are welding beginners.
Nogus machines use flux wires to weld them. (Flux shields instead of gas)
Gas welding is not suitable for outdoor use, as it is affected by wind, but nogus welding uses flux lined wire, so it is suitable for outdoor use.
You can easily weld iron and stainless steel.
Semi-automatic welding is not suitable for clean bead finishes, like TIG welding, but it is very effective when the welding speed is long or you can create multiple pieces of the same product.
Consumable chips, adapter covers, wires, etc. are sold in a variety of items, so please choose with a welder machine.
The power outlet of this unit is convenient for household use.
Please note that this unit has a large flow current, so if you use it frequently or high output output, we do not recommend using a 15A outlet for general household use.
If the main use of high output is used, we recommend cutting the outlets and connecting the wires directly. (Green wires are ground wires. )
FAQs
Q: Please tell us about power and breaker capacity
A: A breaker must be 40A for maximum output use with a single phase 100V machine. For single phase 200V machines, we recommend using a 20A breaker.
Q: Can I order consumables or parts?
A: If you are selling a welding machine, we will try our best to arrange any parts as possible.
Q: Does the machine suddenly move after use?
A: This unit has an overheat protection circuit, so the unit will stop when the temperature exceeds a certain amount of temperature, so please wait until the unit cools.
In addition, please replace the fuse when the fuse is out to protect the main unit.
◎ We will deal with initial defects within 1 week after the product arrives. (In case of initial defects, we will replace it or provide parts to you. When supplying parts, it may take some time for parts importing, etc. In addition, it may not be compatible with applications that exceed the rated usage (punk), unexpected usage, or use in inferior environments, etc. The product is only compatible with initial defects and is not held responsible for any other damages that come with you. ◎ Returns and refunds are basically not accepted after the transaction. This is an imported product, so we think there may be a sweeter finish compared to Japanese products, fine scratches, and exterior box damage, etc. However, we hope you understand that this area is tolerant