Feature

●★【Large LCD Screen / Monitor Flow Rate】:Supports reading in liters and gallons increments, and can be switched between LPM and GPM. DFC15 clearly displays the flow rate (real-time amount of liquid passes per minute), total flow, and temperature detected
●Quantity Control and Alarm Function: When the flow rate reaches the desired setting, the controller automatically turns off the solenoid valve, making it easy to install and control. It automatically stops water filling in your concrete mixer. The controller will alarm when the total amount reaches the set value
●★【For use with all hole effect flow sensors】: By adjusting the K value, you can use it with a variety of flow sensors. High quality with a temperature sensor and can measure the temperature of liquid
●★【Widely Used】: Pool, water dispenser, coffee maker, drip irrigation system, home brewing etc. For example, if you need 5 liters of water, you can set 5 liters of water on the DFC15 controller. When the water in the container reaches 5 liters, the controller controls and closes the solenoid valve and the water flow will automatically stop and get 5 liters of water. Please select the appropriate flow meter. Oil flow meter is required for non-water liquid
●Package Accessories: Thread Type: BSP, but NPT threads. The controller comes with a G1" flow sensor, G1" solenoid valve (N/C), temperature sensor (liquid temperature measurement available), and 12VDC power adapter. 12 Month Warranty!


Description

This DFC15 controller is used to measure and control the flow of liquid and can control the on/off of the solenoid valve when the flow reaches the set value. Suitable for hall effect flow sensor Large LCD screen can display liquid flow, volume, and temperature.

Features
Water Meter: Can be used to measure the amount of water DFC15
Adjustable Accuracy: Adjust the K parameter to adjust the accuracy
Easy-to-read front panel LCD display
Technical Specifications
For DFC15 controller:
Controller Power Required: 12VDC
Power adapter: Input: 100-240VAC; Output: 12VDC, Maximum 2A
Adapter lead length: 3.3 ft (1 m)
Measurement accuracy: ±1%
Solenoid Valve Output: 12VDC, 5A Max.
Temperature Sensor: 0-125℃/ 32-257℉, NTC3950, Accuracy: ±1℃/±1℉ Screw: M8
Maximum Weight: 399999 G/L
Quantity Range: 0-999.99 G/L
Flow range: 0-999.99/LPM (GPM)
Cable length: 3.3 ft (1 m)
Dimension: 88mm x 126mm x 30mm
Weight: 7.1 oz (200 g).
Operating Environment: Temperature: 32-122°F; Relative Humidity: <85%

For G1 Flow Sensor:
Flow range: 3.3 - 13.9 gal/min (1 - 60
Permitted Compression: Water pressure less than 1.75 Mpa
Cable Length: 15cm

For G1" Solenoid Valve:
G1", Thread Male Outer Diameter: 32.5mm
Working Pressure: 0.02-0.8 Mpa
Operating voltage: DC 12V

Note:
1.This controller works with up to 5A solenoid valve, but this kit comes with a 2A power adapter. Please use the appropriate power adapter if you are driving large solenoid valve.
2, Make sure the direction of the solenoid valve and flow sensor is the same as the water flow.
3, Use Teflon on on thread if needed, make sure there is no leakage.
4. The wire can be extended up to 32.8 ft (10 m).
5. Avoid water to the controller.

Package Includes:
1 x DFC15 Controller
1 x G1" Flow Sensor
1 x G1" Solenoid Valve
1 x Power Adapter
1 x Temperature Sensor
1 x Manual (English language not guaranteed).