While some side visors are in circulation, some products that are done overseas,
This product has consistently been designed to be molded into the material, cutting, production, inspection, packaging, shipping, etc.
All procedures are made in Japan and are made with high quality materials.
The material of the side visor is made with impact resistant acrylic (Japan manufacturer).
Due to the technology during the molding, foreign material contamination has been greatly reduced by its unique know-how (air holes in the prevention of air accumulation, static removal, etc.)
Even with vacuum molding levels, we use high quality transparency and a luxurious smoke color.
The cut surface is cut using an industrial laser, so the cut is smooth to cut while melting the section.
In addition, this product is made in Japan that boasts reliable technical capabilities, such as hand-drawing the blade after cutting.
Double-sided tape is suitable for characteristics such as water resistance and resistance to aging.
Uses genuine 3M visor tape (acrylic tape foam).
In addition, the double W fixed with the clasp, it is durable enough for long-term outdoor use.
|
|
|
---|---|---|
1. Attention to the raw materialsThe material is made of impact resistant acrylic, and uses genuine Japanese resin manufacturers that have a good property rating.The impact resistant acrylic is the strongest and strongest acrylic used for motorcycle screens and phone covers.Made in stylish smoke colors that are created with minimal impact resistance and maintain the clear clarity of acrylic as possible. |
2. Attention to DevelopmentUsing the latest 3D scanning technology from the actual vehicle, the design and drawings in the CG and the double-sided tape is designed specifically for the vehicle.Based on CAD data, we create mold mold from the worlds highest standard molds, and developed with original data from the last vehicle fit.This side visor is made to order with great detail. |
3. Production DetailsOur side visors are vacuum formed to be produced.Vacuum molding reduces foreign contamination and achieves high transparency. Final finish at a domestic factory, cutting-edge laser cutting, hand-inspecting and finishing work, we provide side visors products with high standards. |
|
|
|
---|---|---|
STEP1 CleaningCarefully remove the dirt from the mounting part of the visor with the included degreasing cotton. |
STEP2 Remove RubberPull slowly off the top part of the window rubber frame (ram channel). |
STEP3 Temporary StoppingUse a gummed tape to temporarily secure the visor and mark the position of the hole in the visor.Remove visor and install bracket to position the marking. |
|
|
|
---|---|---|
STEP4 Restore Rubber FrameOnce the bracket is installed, the rubber frame will be restored. |
Peel off STEP5 protective tape a littleTake off the protective tape on the visor with the double-sided tape. |
STEP6 Temporary Visor MountingInstall it on your vehicle with care on the brackets and holes on the visor. |
|
|
|
---|---|---|
STEP7 Clip on VisorInsert the bush clip once installed. |
STEP8 tape fixed.Pull the protective tape with your hand to lightly hold the visor to keep it in place.After removing all the protective tape, press the double-sided tape with your hand. |
FinishedSlide it on with a towel or other to make it stick firmly.Please leave it still without washing your car in 24 hours after installation. |