Feature(may vary by option.)

●Accessories: case, eyepiece cap, mounting cap

[MEP20-60]




[MEP38W]





Description

Product Description

3X zoom eyepiece with 20X to 60X* for wide range of objects

Legal Disclaimer

Please contact Nikon Customer Support Center directly for initial defects and specifications for this product
Nikon Customer Support Center
Tel: 0570-02-8000
Operating Time: 9:30 - 18:00 on the end of year, excluding summer holidays, etc



From the Manufacturer



Product Features

Newly designed MONARCH field scope MEP eyepiece with advanced optics

This is a 3x zoom eyepiece designed specifically for the Monarch field scope, and can be used for observing a wide range of objects.

The eye relief is sufficiently long while expanding the field of view throughout the zoom range.

It corrects chromatic aberration even at high magnification, and improves the flatness of the image around the peripheral to ensure a good view at any zoom range.

In addition, when connected to a field scope, it is waterproof (*2), so it is safe for sudden bad weather.

(1) When equipped with a Monarch field scope 82 caliber

(2) Waterproof Performance: Water resistant design that does not affect the internal optical system even if water drips for 30 minutes at a 5 mm per minute.

Accessories

  • Case
  • Eyepiece cap
  • Mounting Cap

Main Specifications

Magnification 20-60x 16-48x
Field of View 2.1-1.0° *1 2.6-1.2° *1
View of view *2 40.4-54.3° *1
Field of view up to 1000 meters 37-17m *1 45-21m *1
Single Dia. 4.1-1.4mm *1 3.8-1.3mm *1
Brightness 16.8-2.0 *1 14.4-1.7 *1
Eye Relief 16.1-15.3mm *1
Dimensions (outer diameter x length): *3 62 x 89mm
Weight: 3 350g
Structure Eyepiece alone: Non-waterproof with field scope mounting: waterproof (5 mm/minute, left for 30 minutes) *4

The upper level is equipped with a MONARCH field scope diameter of 3.2 inches (82 mm), and the lower level is when installed with a MONARCH field scope caliber 2.4 inches (60 mm).

1: The design reference value is for the maximum zoom magnification.

2: Uses a calculation based on reference standards ISO 14132-1:2002.

3: When the cap is not attached.

4: The device has been installed in a regular state, and the waterproof design allows the user to leave it for 30 minutes with a minimum of 5 mm/minute of precipitation, and the internal optical system does not interfere with observation.Not for underwater use.