Feature

●Set Includes: Collet chuck 3-piece set Material: Carbon steel Chuck for 3 sizes of milling cutter: 0.2 inch (6 mm) / 0.2 inch (6.35 mm) (1/4 inch) / 0.3 inch (8 mm) / 3 sizes available. Note: Please check the size before you buy!!!
●Easy Installation: 1. Remove the base plate, remove the collet nut, take out the worn or damaged collet; 2. Install the new collet and install the new collet (When installing, the small end of the collet is inside the part) 3. Lock the nut with a spanner
●Multi-faceted aperture and stabilization When used with clamps, it allows multi-faceted extrusion to provide more contact surface and more stability. Compatible with various wood processing machines
●Adapters such as trimmers, bakelite mills Insert the cutter and adapter and screw the nut. If you have any questions, please feel free to We will provide you with the most satisfactory answer within 24 hours
●Caution: 1. We recommend using a tool with a large shank diameter and a short blade edge. Long blade edge will cause vibration and malfunction; 2. This tool can only be used for wood processing, not for metal, stone, or other non-metallic wood processing; 3. Once the tool jumps, stop working immediately, reinstall and clamp until it is fully contacted; 4. The shank of the tool must be completely inserted into the jacket, and tightened, otherwise cause damage to the knife handle; 5. Comes with glasses and ear pads. Ensure safety measures such as masks and gloves


Description

6mm/6.35mm(1/4")/8mm, 3 sizes available