Rear camber shim for wheel alignment settings for cornering performance during sports rides.
Ensures tire grip during cornering and increases the limits of your vehicle.
■ Alignment Setting: By attaching a camber shim, you can set the angle of the rear wheels ground camber and ensure the tire ground area during cornering and increasing the limits of the vehicle.
The camber angle is -1.5° and the toe close to 0mm to ensure the tire grip during cornering and increasing rotation.
■ Thin-walled design
The main plate is designed with a thin profile to minimize wheel tread width changes associated with installation. Wheel position changes to the tread direction of the wheel center (hub unit) is less than 0.1 inch (3 mm) on the outside (about 0.2 inch (6 mm) on both wheels). Also useful when you do not want to change wheel offset.
(The position of the tire wheel changes to the overall outside, and the lower side of the wheel center will be at least 0.1 inch (3 mm) outward, so please be careful of protrusion.)
By optimizing plate thickness and alignment variations, the hub unit tightening bolts allow the factory equivalent size, durability, heat and weather resistant flange bolts (included).
■ Shape Crevice
For all shims that are constructed, they have been tapped with high precision, and the fixed holes are connected to a plate shape with two or more holes, eliminating the need for angle adjustment during installation.
Designed with a hole for identification to prevent misassembly.
Compatible models:
SUZUKI
Alto Works [HA36S] 15.12~ (1~3 type) / FF
Alto Turbo RS [HA36S] 15.03 - 18.11 (Type 1) / FF
Alto [X] [HA36S] 14.12 - 20.09 (model 1 - 2) / FF / Genuine rear stabilizer equipped car *1, *2
Wagon R Stingray [MH55S] 17.01 - 19.12 (Type 1) / FF/*1
Wagon R [HYBRID FZ] [MH55S] 17.01 - 19.12 (1 model) / FF / Genuine rear stabilizer equipped car *1, *2
MAZDA
Carol (GX) [HB36S] 15.01~/FF/Genuine Rear Stabilizer Vehicle *1, *2
Flare (HYBRID XS) [MJ55S] 17.03~/FF/Genuine Rear Stabilizer Vehicle *1, *2
1. This product is tuned specifically for Alto Works & Alto Turbo RS [HA36S].
It can also be installed on vehicles listed in the compatibility chart above without any issue, and it will work well.
However, when installed on vehicles other than Alto Works & Alto Turbo RS [HA36S], it may differ from those listed performance and specifications.
2. Compatible with vehicles without genuine rear stabilizer are not verified.
Product Specifications:
Material: Steel
Weight: 14.1 oz (400 g) (left and right set)
Finish: Cationic electrodeposition paint (black)
Alignment Amount: Camber Angle: Approx. -1.5°, Toe Weight: Approx. 0mm
Components:
Camber shim A x2
Camber shim B x 2
Cambershim C x 2
8 rear hub bolts
Instruction manual (English language not guaranteed).
Installation: ※ important safety parts (rear drum brake and rear hub) are required.
Installation Precautions:
Although it has been developed to allow the camber angle to be close to -1.5° and the toin to 0mm, there may be slight differences in the amount of alignment due to individual differences in the vehicle.
As the camber angle is added, there is a possibility of degrading the tires.
The braking distance may be extended.
[Precautions]
There may be slight differences in alignment due to individual differences in the vehicle
Depending on the driving stage and road conditions, if the settings do not match, the performance may not be sufficient.
As the camber angle is added, there is a possibility that the tire will lose out.
The braking distance may be extended.
The replacement work for this product is subject to "disassembly service" regulations.
Product specifications may change or discontinue without prior notice.