"Exclusive & Sport"
High grade load down spring that combines high level of elevation, riding comfort and handling.

■Handling
Tuned to exquisite spring characteristics to avoid compromising the feel of normal suspension.
While matching with normal shock absorbers and stabilizers, we have carefully selected the lower car height and center of gravity and front roll center balance, and have been given a sporty and textured handling.

■Riding comfort
Ensures the ride and silence you need for street use. We balanced the unpleasant ride with the normal shock absorber.

■Style
The low down is not too low or too high to create a fearless form.

■ 3D profile design
Front side coil spring adopts a 3D profile design. It has a 3D graduated shape and has been developed with a 3D simulation of shape changes when the coil spring is extended. This allows for the desired spring characteristics and winding while ensuring clearance in tight struts & coil spaces.

- Not only is it a high-quality wire material, but it also has a coiling design that incorporates unique know-how from wire diameter to winding up each coil. It is carefully developed to produce a supple stroke with less mess and noise.
In addition, it is manufactured in a Japanese mass production car suspension factory using high grade high strength spring steel. Made in Japan quality with reliable construction.


Compatible models:
FF*1 / ※2, ※3
Swift RST [ZC13S] 17.01 ~ (Type 1) ~
Fitment Notes: The effects of the vehicle equipped with the safety package (including cruise controls, various brake support, collision reduction, malfunction) are not considered.
(We have designed this product to be difficult to generate checking lights on and fail-safe operations in normal safe driving range.)

Specifications:
Spring Constant N/mm (kgf/mm): Front: 20.5 (2.1), Rear: 22.0 (2.2)
Car height change volume (normal ratio reference): -0.8 - 1.0 inches (20 - 25 mm) *4
Minimum ground height (for reference only): 4.1 inches (105 mm) (under cowl part: 3.7 inches (95 mm) *4, *5
Bump cushion specifications: Front/normal product (unprocessed)
3D profile design spring (front) / Safety standards compliant *5

This is a product for 1 FF cars (2WD cars).
2. The driving characteristics and car height of this product are aimed for best matching with ZC13S Swift RSt 6AT vehicles.
3. The effects of the vehicles equipped with a safety package will not be considered such as cruise control, various brake support, collision reduction, false control functions, or malfunction). (We have designed this product to be difficult to generate checking lights on and fail-safe operations in normal safe driving range.)
4. Numbers are reference data for ZC13S Swift RSt 6AT 2WD grade (without passenger). It may vary depending on vehicle specifications (grade, presence of overcharger, driving method, vehicle individual difference, tire outer diameter, etc.), equipment and luggage condition, fuel loading, etc.
5. Reference data for applicable areas relating to the safety standards of the Road Transport Vehicle Act as of June 2017 (H30). The measurements are measured in 0.2 inch (5 mm) increments on the safety side. In addition, it is only necessary to use the designated installation and adjustment method. Please note that the combination of aerodynamic parts and exhaust parts are attached simultaneously.


[Precautions]
When installing this product (mounting parts that change in height of vehicles), proper alignment and optical axis adjustment is required.
Please check the Monster Site for cars equipped with genuine LED headlights.
To set your headlight auto-leveling system for your vehicle,
Requires special tools (SUZUKI scan tool "SUZUKI-SDT II" or a substitute diagnostic tool).
The impact of this product is not considerably affected by the operation of various camera sensors and sensing radars, including collision damage reduction brakes (pre-crash safe system/radar brake support), and incorrect initiation suppression functions. Due to car height changes, vehicle posture, radar irradiation range, camera recognition range, etc. may affect the control and operation depending on the situation. (Only compatible with the product, we have designed this product with difficult specifications for check lights on and fail-safe operation in normal safe driving range. )
When this product is installed, the operation and control of various camera sensors or sensing radars may occur, or the check light on or fail-safe operation occurs, please initialize the sensor or radar with a dealer with dedicated equipment.
Product specifications may change or discontinue without prior notice.

From the Manufacturer

LuxeSport with Lowered High Definition Load Down Springs with Textured Height, Ride, and Handling

Specifications:

Spring Constant N/mm (kgf/mm): Front: 20.5 (2.1), Rear: 22.0 (2.2)

Vehicle height change rate (normal ratio reference): -0.8 - 1.0 inches (20 - 25 mm)

Minimum underground height (for reference only): 4.1 inches (105 mm) (undercowl part 3.7 inches (95 mm)

Bump cushion specifications: Front/normal product (unprocessed)

3D profile design spring (front) meets safety standards.

Fitment Precautions

The effects of your vehicles equipped with a safety package (including cruise controls, various brake support, collision reduction, malfunction) are not considered to be considered.(We have designed this product to be difficult to generate checking lights on and fail-safe operations in normal safe driving range.)